Bresser Game Camera 5MP Instruction Manual page 19

• Press the UP or DOWN button and then ENTER to confirm the selection.
Cam ID (Shown as icon [b], see the picture above)
• If several cameras are in use, number each camera (up to 99). Press the UP or DOWN button and
press ENTER to confirm the selection between Id:01 and id:099.
PIR
• Select Lo or HI for PIR sensitivity.
• Press the UP or DOWN button, and then ENTER to confirm the selection.
DLY
• "Delay" option allows you to determine how many seconds between each trigger.
• Press the UP or DOWN button, and then ENTER to confirm the selection between 1, 5 and 10
minutes.
Battery Icon (Shown as icon [d], see the picture above)
• The battery icon has 4 levels to display the power status. Press ENTER to move to the next set-
ting.
Micro SD card Icon (Shown as icon [e], see the picture above)
• It indicates the status of the Micro SD card. If no Micro SD card is inserted, it displays "n0" and
continues to flash.
• If a Micro SD card is inserted, it shows "F:n", and you can use the UP or DOWN button to choose
from F:n (don't format SD) or F:y (format SD).
• Press ENTER to end the setting mode, or format the Micro SD card and then finish the set up.
12 Downloading files
1. Eject the Micro SD card from the camera and insert it into a card reader that is connected to a
computer.
2. Open [My Computer] or [Windows Explorer] and double-click the removable disk icon that repres-
ents the Micro SD card.
3. Copy images or videos from the card to your computer.
13 Technical data
Image sensor
Photo resolution
Photo format
Video resolution
Video format
Lens
Display
External memory
Range of IR flash
Triggering distance
Detection angle of sensors
5 MP
5 MP / 20 MP (interpolated)
JPEG
1920 x 1080 @ 10 sec (25 fps)
AVI
f=3.88mm, F/No=1.8, FOV=62.8 degrees; Auto IR
filter
Yes (8888 B/W + icons)
Micro SD card up to 32GB (Micro SD card in-
cluded)
15 m
15 m (Below 25° C at the Normal Level)
60°
19 / 100