HOMCOM 821-032V70 Manual page 10

Drying mode indicator ' o ': When the drying mode is selected, this indicator will be
on. It will be off if the drying mode is not activated.
Continuous dehumidification mode indicator ' o ': When the continuous
dehumidification working mode is selected, this indicator will be on. It will be off if
the continuous dehumidification mode is not activated.
Ambient humidity indicator ' yang ' : When the ambient humidity reaches the set
humidity and stops, the ' yang ' digital tube will flash.
Water full indicator ' o ' : The water full indicator will flash when the water tank is full.
It will be off when the water tank is not full.
During normal operation, ' 88 ' displays the current ambient humidity value.
Scene light settings
Precautions
- Do not operate the dehumidifier at a humidity setting higher than the ambient
humidity to avoid potential issues.
- When the water full indicator is illuminated, empty the water tank by pouring out
the water. Place the emptied water tank back in its original position before
continuing to use the appliance.
- After the machine stops, wait for at least three minutes before restarting to
prevent damaging the compressor.
- The recommended ambient temperature range is 41-95°F (5-35°C).
- During the dehumidification process, the operating compressor generates heat,
which can increase the room temperature. This is a normal occurrence.
- When moving the product, lift it facing the front to ensure safe handling.
Drain indication
The drained water can be stored in a tank or externally drained using a hose.
Use of the water tank
The water dehumidified by the machine will automatically flow into the water tank.
When the water tank is full, the indicator light will illuminate and the entire machine
will stop running. Follow these steps to empty the water tank:
- Refer to the picture and remove the water tank.
- Pour out the water from the tank.
- Place the tank back in its original position.
- Press the power button to start the machine.
9