HOMCOM 712-066V00 Manual page 6

Brake adjustment is carried out as follows:
Adjusting screw
Removable cane holder
Attach the cane holder to the side of the frame in the provided position. To do this,
slide the cane holder onto the holder from above.
Folding and storing the rollator
Step 1:
Pull the handle in the
middle of the seat firmly
upwards to fold the rollator.
The brakes must always be adjusted so that
they are the same on both wheels Braking
effect is achieved. If the rear brake is set too
light or too tight, it will affect the Function of
the brake!
Turn the adjusting screw anti-clockwise to
increase the tension, then lock the
adjustment locking nut clockwise whilst
holding the adjuster screwstationary.
Brake adjustment reduced to allow light
pressure may be ineffective on the brake
position.
Step 2:
Continue to push the
rollator on both sides
of the frame.
5
Step 3:
Remove the Shock absorbing
springs and fold that both
rear wheels upwards.