Advantech AIMB-292 Startup Manual

AIMB-292
THIN AI Motherboard with Intel® Core™ i9/i7/i5/i3
Processor
MXM GPU Module Integration
Startup Manual
Packing List
Before installation, please ensure that the following items
have been included in your shipment:
1. AIMB-292 THIN AI Motherboard
2. 1 x SATA HDD cable
3. 1 x SATA power cable
4. 1 x serial port cable
5. 1 x I/O port bracket
6. 1 x Startup Manual
7. 1 x Warranty Card
8. 2 x screws M3x4.5L
If any of the above items are missing or damaged, contact
your distributor or sales representative immediately.
Note: Acrobat Reader is required to view any PDF
file. Acrobat Reader can be downloaded at: get.
adobe.com/reader (Acrobat is a trademark of
Adobe.).
For more information on this and other Advantech
products, please visit our website at:
http://www.advantech.com
For AIMB-292 drivers and user manual download,
technical support, and service, please visit our support
website at:
http://www.advantech.com/support
This manual is for the AIMB-292 series Rev.A1.
Part No. 2046029200
Printed in China
Edition 1
September 2024
Specifications
Standard SBC Functions
• CPU: Supports Intel
® Core™ i9/i7/i5/i3 LGA1700 CPU
(up to 65W)
• BIOS: AMI EFI 256 Mbit SPI
• Chipset: Intel
®
Q670E Chipset
• System memory: Up to 96GB in two 262-pin SODIMM
sockets. It supports DDR5 5600 MT/s SDRAM
Note: Due to the inherent limitations of the PC architec-
ture, the system may not fully detect 96GB RAM
when 96GB RAM is installed.
• Storage:
- 1 x M.2 M-Key (2280), for NVMe storage
- 1 x M.2 E-Key (2230), for Wi-Fi/BT or
1 x M.2 B-Key (3042), only for LTE by option
- 1 x SATA III connector
• Serial ports: 2 x RS-232/422/485 with auto flow control
• Watchdog timer: 1~255 level timer intervals
• USB 3.2/2.0: Supports up to 4 x USB 3.2 Gen2x1 and
2 x USB 2.0
Graphics Interface
• Chipset for data processing: Both native Intel® UHD
Graphics 770 and discrete NVIDIA RTX/Quadro MXM
GPU.
• Display resolution:
DP: Supports 2 x DP 1.4a up to 4K at 120Hz from MXM
module and 1 x DP++ up to 4096 x 2160 @60 Hz from
the CPU
LVDS/eDP: Supports 1 x LVDS up to 1920x1200 @60Hz
or eDP up to 1920x1080 @60Hz by pass mode
Ethernet Interface
• Interface: 10/100/1000/2500 Mbps
• Controller:
- LAN1: 2.5 GbE Intel I226-V
- LAN2: 2.5 GbE Intel I226-V
- LAN3: 1 GbE Intel I210-AT
Mechanical and Environmental
• Dimensions (L x W): 170 x 230 mm
• Power supply voltage: 24V
• Power requirements: Boost 100.2W; Typical 62.5W
(configuration: Intel® Core™ i9-14900 5.4 GHz, 2pcs 48
GB DDR5 5600 MT/s SODIMM)
• Operating temperature: 0 ~ 55°C
• Weight: 1.5 kg (weight of board)
AIMB-292 Startup Manual 1