Compaq 234664-002 - ProLiant - ML330T02 Troubleshooting Manual page 128

207-Invalid Memory Configuration - Mismatched DIMMs within DIMM Bank
Audible Beeps: 1 long, 1
Possible Cause: Installed DIMMs in the same bank are of different sizes.
Action: I nstall correctly matched DIMMs.
207-Invalid Memory Configuration - Mismatched DIMMs within DIMM Bank...
...Memory in ank X Not Utilized. B
Audi ble Beeps: 1
Possible Cause: Installed DIMMs in the same bank are of different sizes
Action: Install correctly matched DIMMs.
207-Inv alid Memory Configuration - Mismatched DIMMs within DIMM Bank...
...Memory in Board X Bank X Not Utilized.
Audible Beeps: 1 long, 1 short
Possi ble Cause
Act n: Install correctly matched DIMMs. io
207-Invalid Memo
Audible Beeps
Possible Cause: One of the DIMMs in bank X is of an unsu
Action: Install supported
207-Inv alid Memory Configuration - Single channel memory...
...mode s upports a single DIMM installed in DIMM socket 1. Please remove
valid pairs. System Halted.
Audible Beeps
Possible Cause: DIMMs are installed in pairs, but the server is in single chann
Action: Remove all other DIMMs or install memory in valid pairs and change the memory mode.
207-Invalid Memory Configuration - Unsupported DIMM in Socket X
Audible Beeps: 1 long, 1 short
Possible Cause: Unregistered DIMMs or insufficient DIMM timings.
Action: Install registered ECC DIMMs.
207-Memory Configuration Warning - DIMM In Socket x does not have Primary
Width of 4 and only supports standard ECC
Advanced ECC does not function when mixing DIMMs with Primary Widths of x4 and x8.
short
long, 1 short
: Installed DIMMs in the same bank are of different sizes.
ry Configuration - Unsupported DIMM in Bank x
: 1 long, 1 short
DIMMs to fill the bank.
: 1 long, 1 short
.
pported type.
all other DIMMs or install memory in
el memory mode.
Error messages 128