12.1”/19”/24” intel 8th core i3/i5 marine panel pc (50 pages)
Summary of Contents for Aplex FABS-8 B Series
Page 1
Stainless Front bezel Fanless Industrial Panel PC User Manual Release Date Revision Dec.2024 V1.1 ®2024 Aplex Technology, Inc. All Rights Reserved. Published in Taiwan Aplex Technology, Inc. 15F-1, No.186, Jian Yi Road, Zhonghe District, New Taipei City 235, Taiwan Tel: 886-2-82262881 Fax: 886-2-82262883 Email: aplex@aplex.com...
Revision History Reversion Date Description 2024/01/30 Initiation 2024/12/27 1. Updated SPEC 2. Removed Chapter 4. Installation of CD Drivers FABS-8XXB Series User Manual...
Disclaimer This information in this document is subject to change without notice. In no event shall Aplex Technology Inc. be liable for damages of any kind, whether incidental or consequential, arising from either the use or misuse of information in this document or in any related materials.
Safety Precautions Follow the messages below to prevent your systems from damage: ◆ Avoid your system from static electricity on all occasions. ◆ Prevent electric shock. Don‘t touch any components of this card when the card is power-on. Always disconnect power when the system is not in use. ◆...
Table of Contents Revision History............................1 Warning!_______________________________________ ................ 2 Safety Precautions ..........................3 Chapter 1 System Product ........................ 6 Features ..............................6 Specifications ............................6 Standard LCD ............................8 High Brightness LCD ..........................9 Power Consumption and PoE Application ................... 10 Dimensions ............................
Page 6
IST OF IGURES Figure 1 Dimensions of FABS-807BP/BR(H)……………………………………………………………………………….……………….11 Figure 2 Dimensions of FABS-810BP/BR(H)……………………………………………………………………………….……………….11 Figure 3 Dimensions of FABS-812BP/BR(H)……………………………………………………………………………….……………….12 Figure 4 Dimensions of FABS-815BP/BR(H)…………………………………………………………………………….………………….12 Figure 5 Dimensions of FABS-816BP/BR(H)…………………………………………………………………………….………………….13 Figure 6 Dimensions of FABS-817BP/BR(H)…………………………………………………………………………….………………….13 Figure 7 Dimensions of FABS-818BP/BR(H)…………………………………………………………………………….………………….14 Figure 8 Dimensions of FABS-819BP/BR(H)……………………………………………..…………………………….…………………..14 Figure 9 Dimensions of FABS 821BP/BR(H)……………………………………………………………………………………..…………15 Figure 10 Front View of FABS-8XXB Series..…………………………………………………………….…………….…………………..16 Figure 11 Rear View of FABS-8XXB Series………………………..………………………………….…………………………..………..16...
System Product Chapter 1 1.1 Features ⚫ 7”/10.1”/12.1”/15”/15.6”/17”/18.5”/19”/21.5” Stainless Front Bezel Industrial Panel PC ⚫ Flat front panel touch screen ⚫ Fanless Design ⚫ Onboard Intel® Celeron® J6412 Processor ⚫ 1 x SO-DIMM slot, up to 32GB DDR4 3200MHz SDRAM ⚫...
Page 8
5. 2 x COM(RS-232) (TB-528C2) 6. 1 x COM(RS-232) + 2 x USB2.0 (TB-528C1U2) 7. 4 x USB2.0 Type A + 1 x Mini-PCIe + 1 x SIM slot (TB-528U4ME1) 8. 2 x COM(RS-422/485, isolated) (TB-528C2I) 9. 1 x LAN + 2 x USB2.0 type A (TB-528E1U2) 1 x 2W Speaker (Through TB-38) Auto Dimming (Through TB-38, Except FABS-819BR) GPIO (4xDI, 4xDO, through TB-542)
⚫ AT: Directly PWR on as power input ready ⚫ ATX: Press button to PWR on after power input ready Support POE++ through TB-528E1U2UPOE (depends on real power consumption) Backup Battery Backup battery 21W(option) (Can’t be installed with HB LCD) Mechanical Front Bezel Metal SUS304 Stainless Steel (Default), SUS 316(L)(for option)
1.5 Power Consumption and PoE Application Max power consumption of each model Max Power PoE (PD): follow IEEE PoE (PD): follow IEEE Model Consumption 802.3at 802.3bt Class 6 FABS-807B FABS-810B FABS-812B FABS-815B FABS-816B FABS-817B FABS-818B FABS-819B FABS-821B *30W PoE (PD)Limited Support: To achieve 30W PoE support, the system must reduce CPU power consumption, lower the LCD brightness, and adjust the BIOS settings.
Figure 9 Dimensions of FABS-821BP/BR(H) 1.7 Brief Description of FABS-8XXB Series There are 7”~21.5” Industrial Compact Size Panel PC in FABS-8XXB series, which comes with flat front panel touch screen and fanless design. It is powered by Intel Elkhart Lake J6412 processor with one SO-DIMM DDR4 slot, up to 32GB 3200 MHz.
Figure 10 Front View of FABS-8XXB Series Figure 11 Rear View of FABS-8XXB Series 1.8 VESA Mounting The FABS-8xxB series is designed to be VESA mounted as shown in Picture. Just carefully place the unit through the hole and tighten the given screws from the rear to secure the mounting. Figure 12 VESA MOUNT of FABS-8XXB FABS-8XXB Series User Manual...
1.9 Panel Mounting There are four holes located along the four sides of the HMI. Insert the clamp from the four sides and tighten them with the nuts provided. Figure 13 Panel Mount of FABS-8XXB FABS-8XXB Series User Manual...
Hardware Chapter 2 SBC-7130 is a 4" industrial motherboard developed on the basis of Intel Elkhart Lake, which provides abundant peripheral interfaces to meet the needs of different customers. Also, it features dual GbE ports, 2-COM ports and one M.2 B-Key and one M.2 E-Key and one mPCIe slot configuration, one DP port, one LVDS interface.
Page 20
1x RS232/422/485,DB9,Pin9 with 5V/13.5V/RI (COM1) 1x RS232,2x5Pin header,Pin10 with 5V/13.5V/RI (COM2,option) Serial 2x UART for CN3 (COM3,COM4) 2x RS422/485 header for CN2 (COM5/COM6) GPIO 8-bit digital I/O by Pin header (CN2) 4-bit digital Input 4-bit digital Output 4-bit digital I/O by Pin header (CN3) 2-bit digital Input 2-bit digital Output Audio...
1 x DP Port 1 x Audio Jack (Line out) 1 x Power on/off connector (BT1) Operating: -20℃ to 70℃ Temperature Storage: -40℃ to 85℃ Humidity 10% - 90%, non-condensing, operating Power Consumption DC24V/1.05A (Intel J6412 2.00 GHz Processor with 8GB DDR4/HDD) EMI/EMS Meet CE/FCC class A 2.2 Board Dimensions...
Page 24
6. SW1: (Switch DIP-6Pin), PoE mode and CHG-BAT and AT/ATX mode and CMOS and auto Power on jumper setting. Mode Pin1 (ON) PoE Mode (for PB-434) Pin1 (OFF) No PoE Mode Pin4 (ON) No CHG-BAT (option) Pin4 (OFF) For CHG-BAT ON (Default) Pin5 (ON) Reserve Pin5 (OFF)
Page 25
7. DC_IN1: (5.08mm Pitch 1x3 Pin Connector),DC9~36V System power input connector. Pin# Power Input Pin1 DC_IN+ (DC+9V~36V) Pin2 DC_IN- (Ground) Pin3 Model DC_IN1 SBC-7130-J6412 180°Connector SBC-7130P-J6412 45°Connector SBC-7130C-J6412 180°Connector SBC-7130-X6425E 180° Connector SBC-7130C-X6425E 180° Connector 8. JP2 (NC): (2.54mm Pitch 1x2 Pin Header), Power input setting. Power Adapter input (DC_IN1) Open DC+9V~36V input (Default)
Page 26
11. SW_LVDS1: (Switch DIP-6Pin), LVDS jumper setting. S_LVDS(Switch) Function (CN1) Pin1 (ON) 3.3V Level Pin1 (OFF) 5V Level Pin2 (ON) Single channel LVDS Pin2 (OFF) Dual channel LVDS Pin3 (ON) 8/24 bit Pin3 (OFF) 6/18 bit Pin4 (ON) DC Mode Pin4 (OFF) PWM Mode Pin5 (ON)
Page 27
BKLT_CTRL DC+9V~36V input (DC_IN1) DC+9V~36V input (DC_IN1) Power output (INVT1/CN1:Pin1/Pin2) Power Input DC_IN1 DC13.5V PB-434(option) DC10.5~13.5V 14. CN1: (1.25mm Pitch 2x20 Connector, DF13-40P), for 18/24-bit LVDS output connector, fully supported by Parad PS8625(DP to LVDS), the interface features dual channel 24-bit output.
Page 28
GND_EARCH 16. JP1: (2.0mm Pitch 2x3 Pin Header),COM1 jumper setting, pin 1~6 are used to select signal out of pin 9 of COM1 port. JP1 Pin# Function Close 1-2 COM1 Pin9 RI (Ring Indicator, Default) Close 3-4 COM1 Pin9 = +5V/1A (option) Close 5-6 COM1 Pin9 = +10.5~13.5V/1A (option) Power output (COM1:Pin9,COM2:Pin10)
Page 29
RS422 (option): Pin# Signal Name 422_TX- 422_TX+ 422_RX+ 422_RX- Ground BIOS Setup:Serial Port 1 Configuration【RS-422】 RS485 (option): Pin# Signal Name 485- 485+ Ground BIOS Setup:Serial Port 1 Configuration【RS-485】 FABS-8XXB Series User Manual...
Page 30
18. COM2: (2.0mm Pitch 2x5 Pin Header),COM2 Port, standard RS232 port are provided. They can be used directly via COM cable connection. COM2: RS232: Signal Name Pin# Pin# Signal Name Ground 13V+BAT_S0(DC10.5~13.5V) BIOS Setup:Serial Port 2 Configuration【RS-232】 19. USB3_1: USB3-1/USB3-2:(Double stack USB typeA),Rear USB3.1 connector, it provides up to 2 USB3.1 ports,USB3.1 allows data transfers up to 5.0Gb/s,support USB2.0 and full-speed and low-speed signaling.
Page 31
21. LAN1: (RJ45 Connector Rear LAN port, one standard 10/100/1000/2500Mbps RJ45 Ethernet port are provided. Used Intel I226-LM chipset. 22. LAN2: (RJ45 Connector Rear LAN port, one standard 10/100/1000/2500Mbps RJ45 Ethernet port are provided. Used Intel I226-LM chipset. 23. SATA_P2: (2.5mm Pitch 1x2 Wafer Pin Header), One onboard 5V output connectors are reserved to provide power for SATA devices.
Page 32
Pin# Signal Name SIM_VCC SIM_RST SIM_CLK Ground SIM_VCC_R(NC) SIM_IO 28. M2_B1: (M.2 Socket),M.2 B-Key,it is located at the top, it supports M.2 B-Key devices with one USB3.1/SATAIII auto detect. support 2242 SSD. Function Support SATAIII signal Auto detect USB3.0 signal USB2.0 signal Co-lay, NC 29.
Page 33
Signal Name Pin# Pin# Signal Name +5V_F_AUDIO GND_AUD LINE-OUT-L LINE-OUT-R FRONT_JD LINE_JD LINE-IN-L LINE-IN-R MIC-IN-L MIC-IN-R GND_AUD MIC1_JD 34. LED1, LED3, LED4, LED5, LED7, LED9, LED10, LED11, LED12: LED1 STATUS. Blue LED for PM6000 Power status. LED3 STATUS. Blue LED for M2E_BT_LED- status. LED4 STATUS.
Page 34
38. U4(option) Infineon’s Trusted Platform Module (TPM2.0) SLB9672VU2.0 is a fully standard compliant TPM based on the latest Trusted Computing Group (TCG) specification 2.0. *Note: Only support Windows 10 IOT. Model TPM Function U4(SLB9672VU2.0) fTPM (BIOS) SBC-7130-J6412 ● ● SBC-7130P-J6412 ●...
Page 35
Function Signal Name Pin# Signal Name Function 5V_S5 5V_S5 5V_S5 5V_S5 USB2_OC0_12- PS_ON_ALL- USB1 USB1_N USB1_P USB1 USB2 USB2_N USB2_P USB2 Ground Ground PCH_SPI1_CLK SPI1_MISO_PCH PCH_SPI1_CS0- PCH_SPI1_MOSI GP91_RI4- GP66_DCD4- COM4 COM4 GP96_TXD4 GP97_RXD4 (UART) (UART) GP93_DTR4- GP94_RTS4- GP95_DSR4- GP92_CTS4- Ground Ground GP14_RI3- GP63_DCD3-...
Page 36
Signal Name Pin# Pin# Signal Name 13V+BAT_S5 Ground 13V+BAT_S5 Ground 13V+BAT_S5 Ground 13V+BAT_S5 Ground 13V+BAT_S5 Ground 13V+BAT_S5 13V_12V_DC 13V+BAT_S5 13V_12V_DC Ground POE_ON ECH3_SEL_BAT1 FP_PWRBTN- ECA1_CHG1_UP 3P3V_ALLS ECH4_EN_CHG1 3P3V_ALLS ECH5_EN_BAT1 SMB_DAT_BAT1 SMB_CLK_BAT1 VCC_BAT1 BAT1_TEMP- VCC_BAT1 Ground Model Function CN434 SBC-7130-J6412 SBC-7130P-J6412 SBC-7130-X6425E Smart battery SBC-7130C-J6412...
Page 37
Signal Name Pin# Pin# Signal Name 13V+BAT_S5 Ground 13V+BAT_S5 Ground 13V+BAT_S5 Ground 13V+BAT_S5 Ground 13V+BAT_S5 Ground 13V+BAT_S5 13V_12V_DC 13V+BAT_S5 13V_12V_DC Ground POE_ON FP_PWRBTN- ECA1_CHG1_UP 3P3V_ALLS ECH4_EN_CHG1 3P3V_ALLS ECH5_EN_BAT1 SMB_DAT_BAT1 SMB_CLK_BAT1 VCC_BAT1 BAT1_TEMP- VCC_BAT1 Ground BAT_1: (1.25mm Pitch 1x9 Pin Header). Connection to 3S1P Smart Battery charger. Pin# Signal Name Remarks...
Page 38
43. PB-434 R2.00(option): This is the smart battery charger board. The size of this board is: 90 x 20mm. CN_434: (1.25mm Pitch, DF13-30P),Connect the CN_434 Connector of PB-434 R2.00 to the CN434 connector of SBC-7130C-XX R0.30. Signal Name Pin# Pin# Signal Name 13V+BAT_S5 Ground...
Page 39
Ground Ground Ground Function Specifications Nominal voltage (3S1P) 11.1~12.6V Charge voltage 12.6V Charge current 0.5C LED_1 STATUS. Green LED for CHG1_STAT1 status. LED_2 STATUS. Blue LED for CHG1_STAT2 status. LED_3 STATUS. Green LED for 3P3V_BAT status. FABS-8XXB Series User Manual...
Chapter 3 BIOS Setup Description 3.1 Operations after POST Screen After CMOS discharge or BIOS flashing operation. Press [Delete] key to enter CMOS Setup. After optimizing and exiting CMOS Setup Press F11 to load default values and continue 0085 3.2 BIOS SETUP UTILITY Press [Delete] key to enter BIOS Setup utility during POST, and then a main menu containing system summary information will appear.
3.3 Main Settings Aptio Setup - AMI Main Advanced Chipset Security Boot Save & Exit BIOS Information Choose the system default Project Version 7130V002 language EC VERSION 7130E005 Build Date and Time 06/14/2023 16:22:58 Compute Die Information Name ElkhartLake ULX Type Intel(R) Celeron(R) J6412 @ 2.00GHz...
Page 44
[Disabled] [Enabled] #AC Split Lock: [Enabled] [Disabled] 3.4.2 Power & Performance Power & Performance CPU – Power Management Control CPU – Power Management Control P0 Fused Max Core Ratio P1 Fused Max Core Ratio P2 Fused Max Core Ratio P3 Fused Max Core Ratio Boot performance mode: [Max Battery] [Max Non-Turbo Performance]...
Page 45
[Disabled] [Enabled] View/Configure Turbo Options Current Turbo Settings Max Turbo Power Limit 4095.875 Min Turbo Power Limit Package TDP Limit 10.0 Power Limit 1 10.0 Power Limit 2 20.0 1-core Turbo Ratio 2- core Turbo Ratio 3- core Turbo Ratio 4- core Turbo Ratio Energy Efficient P-state: [Disabled]...
Page 46
PSYS PMax Power Acoustic Noise Settings Acoustic Noise Settings Acoustic Noise Mitigation: [Disabled] [Enabled] VccIn VR Domain Disable Fast PKG C State Ramp for VccIn Domain: [FALSE] [TRUE] Slow Slew Rate for VccIn Domain: [Fast/2] [Fast/4] [Fast/8] [Fast/16] VccIn VR Settings VccIn VR Domain VR Config Enable: [Disabled]...
Page 48
[Disabled] [Enabled] CState Pre-Wake: [Disabled] [Enabled] IO MWAIT Redirection: [Disabled] [Enabled] Package C State Limit [C3] C6/C7 Short Latency Control(MSR 0x60B) Time Unit [1024 ns] Latency C6/C7 Short Latency Control(MSR 0x60C) Time Unit [1024 ns] Latency C8 Latency Control(MSR 0x633) Time Unit [1024 ns] Latency...
Page 49
Energy Performance Gain: [Disabled] [Enabled] EPG DIMM Idd3N EFG DIMM Idd3P Power Limit 3 Settings CPU Lock Configuration CFG Lock: [Disabled] [Enabled] Overclocking Lock: [Disabled] [Enabled] GT – Power Management Control GT – Power Management Control Maximum GT frequency: [Default Max Frequency] [100Mhz] [150Mhz] [200Mhz]...
Page 50
Disable Turbo GT frequency: [Enabled] [Disabled] 3.4.3 Thermal Configuration Thermal Configuration Enable All Thermal Funcations: [Disabled] [Enabled] CPU Thermal Configuration Cpu Thermal Configuration DTS SMM: [Disabled] [Enabled] [Critical Temp Reporting(Out of spec)] Tcc Activation Offset Tcc Offset Time Window: [Disabled] [5ms] [10 ms] [55 ms]...
Page 53
[63 C] [71 C] [79 C] [87 C] [95 C] [103 C] [111C] [119 C (POR)] Active Trip Point 1 Fan Speed: Passive Trip Point : [Disabled] [15 C] [23 C] [31 C] [39 C] [47 C] [55 C] [63 C] [71 C] [79 C] [87 C]...
Page 54
CPU Energy Read: [Disabled] [Enabled] CPU Temp Read: [Disabled] [Enabled] Alert Enable Lock: [Disabled] [Enabled] CPU Temp CPU Fan Speed DPTF Configuration DPTF Configuration Hardware Health Monitor Hardware Health Monitor Thermal Sensor 1 Temp 0.0 C Thermal Sensor 2 Temp 0.0 C Thermal Sensor 3 Temp 0.0 C...
Page 55
3.4.6 Super IO Configuration Super IO Configuration Super IO Chip IT8786 Serial Port 1 Configuration Serial Port 1 Configuration Serial Port: [Disabled] [Enabled] Device Settings IO=3F8h; IRQ=4; Change Settings: [Auto] [IO=3F8h; IRQ=4] [IO=3F8h; IRQ=3,4,5,6,7,9,10,11,12;] [IO=2F8h; IRQ=3,4,5,6,7,9,10,11,12;] [IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12;] [IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12;] COM1 Config: [RS232 mode] [RS485 mode]...
Page 56
Change Settings: [Auto] Serial Port 4 Configuration Serial Port 4 Configuration Serial Port: [Disabled] [Enabled] Device Settings IO=2E8h; IRQ=4; Change Settings: [Auto] Serial Port 5 Configuration Serial Port 5 Configuration Serial Port: [Disabled] [Enabled] Device Settings IO=2F0h; IRQ=4; Change Settings: [Auto] COM5 Config: [RS485 mode]...
Page 57
CPU_CORE_VIN : +1.653 V +1.2V : +1.236 V +12V : +13.120 V : +5.123 V Smart Fan Function Fan 1 Setting Fan 1 Setting Smart Fan 1 Mode: [Software Mode] [Automatic Mode] Fan 1 Type: [PWM] [RPM] Tempurature select: [TMPIN1] [TMPIN2] [TMPIN3] Fan off temperature limit:...
Page 58
[EDP1] [DP1] Brightness Setting BIST Enable: [Disabled] [Enabled] 3.4.12 Network Stack Configuration Network Stack: [Disabled] [Enabled] 3.4.13 NVME Configuration NVMe Configuration No NVME Device Found FABS-8XXB Series User Manual...
3.5 Chipset Settings Aptio Setup - AMI Main Advanced Chipset Security Boot Save & Exit ►System Agent (SA) Configuration System Agent (SA) ►PCH-IO Configuration Parameters →←: Select Screen ↑↓ : Select Item Enter: Select +/- : Charge Opt. F1 : General Help F2: Previous Values F3:Optimized Defaults F4:Save and Exit...
Page 60
[2- Enabled HOT only] LPDDR Thermal Sensor: [Disabled] [Enabled] SelfRefresh Enable: [Disabled] [Enabled] SelfRefresh IdleTimer: Throttler CKEMin Defeature: [Enabled] [Disabled] Throttler CKKEMin Timer: For LPDDR Only: Throttler CKEMin Defeature: [Enabled] [Disabled] For LPDDR Only: Throttler CKEMin Timer: 64 Dram Power Meter Dram Power Meter Use user provided power weights, Sacle factor, and channel power...
Page 61
Write Energy Ch1Dimm0 Idle Energy Ch1Dimm1 PowerDown Energy Ch1Dimm1 Activate Energy Ch1Dimm1 Read Energy Ch1Dimm1 Write Energy Ch1Dimm1 Memory Thermal Reporting Lock Thermal Management Registers: [Disabled] [Enabled] Memory Thermal Reporting Extern Therm Status: [Disabled] [Enabled] Closed Loop Therm Manage: [Disabled] [Enabled] Open Loop Therm Manage: [Disabled]...
Page 91
[Disabled] ClkReq for Clock4: [Platform-POR] [Disabled] Clock5 assignment: [Platform-POR] [Enabled] [Disabled] ClkReq for Clock5: [Platform-POR] [Disabled] SATA Configuration SATA Configuration SATA Controller(s): [Enabled] [Disabled] SATA Mode Selection: AHCI SATA Ports Multiplier: [Enabled] [Disabled] SATA Test Mode: [Enabled] [Disabled] Software Feature Mask Configuration Software Feature Mask Configuration HDD Unlock: [Disabled]...
Page 92
[Enabled] Configured as eSATA Hot Plug supported External: [Disabled] [Enabled] Spin Up Device: [Disabled] [Enabled] SATA Device Type: [Hard Disk Drive] [Solid State Drive] Topology: [Unknown] [ISATA] [Direct Connect] [Flex] [M2] SATA Port 0 DevSlp: [Disabled] [Enabled] SATA Port 0 RxPolarity: [Disabled] [Enabled] DITO Configuration:...
Page 93
Spin Up Device: [Disabled] [Enabled] SATA Device Type: [Hard Disk Drive] [Solid State Drive] Topology: [Unknown] [ISATA] [Direct Connect] [Flex] [M2] SATA Port 1 DevSlp: [Disabled] [Enabled] SATA Port 1 RxPolarity: [Disabled] [Enabled] DITO Configuration: [Disabled] [Enabled] DITO Value DM Value Serial ATA Port 2 Empty Software Preserve...
Page 94
Topology: [Unknown] [ISATA] [Direct Connect] [Flex] [M2] SATA Port 2 DevSlp: [Disabled] [Enabled] SATA Port 2 RxPolarity: [Disabled] [Enabled] DITO Configuration: [Disabled] [Enabled] DITO Value DM Value USB Configuration USB Configuration XHCI Compliance Mode: [Disabled] [Enabled] xDCI Support: [Disabled] [Enabled] USB2 PHY Sus Well Power Gating: [Disabled] [Enabled]...
Page 95
USB Overcurrent Lock: [Disabled] [Enabled] USB Port Disable Override: [Disabled] [Select Per-Pin] USB Device/HOST Mode Override: [Disabled] [Select Per-Pin] USB UCSI ACPI device: [Disabled] [Enabled] SCS Configuration eMMC 5.1 Controller: [Disabled] [Enabled] eMMC 5.1 HS400 Mode: [Disabled] [Enabled] Enable HS400 software tuning: [Disabled] [Enabled] Enable HS400 software tuning:...
3.6 Security Settings Aptio Setup - AMI Main Advanced Chipset Security Boot Save & Exit Password Description Set Administrator Password If ONLY the Administrator’s password is set, then this only limits access to Setup and is only asked for when entering Setup. If ONLY the User’s password is set, then this Is a power on password and must be entered to Is a power on password and must be entered to...
Save & Exit Settings Aptio Setup - AMI Main Advanced Chipset Boot Security Save & Exit Save options Exit system setup after Save Changes and Exit Saving the changes. Discard Changes and Exit Save Changes and Reset Discard Changes and Reset Save Changes Discard Changes →←: Select Screen...
Page 99
[Yes] [No] Discard Changes Discard Changes done so far to any of the setup options? [Yes] [No] Restore Defaults Restore /Load Defaults values for all the setup options? [Yes] [No] Save as user Defaults Save the changes done so far as User Defaults? [Yes] [No] Restore user Defaults...
Installation of Drivers Chapter 4 This chapter describes the installation procedures for software and drivers under the windows 10. The software and drivers are included with the motherboard. The contents include Intel Chipset, Graphics chipset driver, Audio driver, Intel® management engine interface, and LAN driver; the resistive touch driver.
Page 101
Step 2. Read the license agreement. Click Accept to accept all of the terms of the license agreement. Step 3. Click Install to begin the installation. FABS-8XXB Series User Manual...
Page 102
Step 4. Select Restart Now to reboot your computer for the changes to take effect. FABS-8XXB Series User Manual...
4.2 Intel® HD Graphics Chipset To install the Intel® HD Graphics Chipset, please follow the steps below. Step 1. Click Begin installation. Step 2. Read the license agreement. Click Yes to accept all of the terms of the license agreement. And Click Next to setup program FABS-8XXB Series User Manual...
Page 104
Step 3. Choose Install function and Click Start to setup program. FABS-8XXB Series User Manual...
Page 105
Step 4. Click Finish to complete installation. FABS-8XXB Series User Manual...
4.3 Realtek HD Audio Driver Installation To install the Realtek HD Audio Driver, please follow the steps below. Step 1. Click Next to continue. Step 2. Click Yes, I want to restart my computer now. Click Finish to complete the installation. FABS-8XXB Series User Manual...
4.4 Intel® Management Engine Interface To install the Intel® Management Engine Interface, please follow the steps below. Step1. Select setup language you need. Click Next to continue. Step 2. Choose I accept the terms in the License Agreement and click Next to begin the installation.
Page 108
Step 3. Click Next to continue. Step 4. Click Finish to complete the installation. FABS-8XXB Series User Manual...
4.5 LAN Driver To install the LAN driver, please follow the steps below. Step 1. Click Next to continue. Step 2. Choose I accept the terms in the License Agreement and click Next to begin the installation. FABS-8XXB Series User Manual...
Page 110
Step 3. Click Next to continue. Step 4. Click Install to begin the installation. FABS-8XXB Series User Manual...
4.6 Touch Screen Installation This chapter describes how to install drivers and other software that will allow your touch screen work with different operating systems. Windows 10 Universal Driver Installation for PenMount 6000 Series 4.6.1 Before installing the Windows 10 driver software, you must have the Windows 10 system installed and running on your computer.
Page 112
Step 2. Read the license agreement. Click I Agree to agree the license agreement. Step 3. Choose the folder in which to install PenMount Windows Universal Driver. Click Install to start the installation. FABS-8XXB Series User Manual...
Page 113
Step 4. Click Yes to continue. Step 5. Click Finish to complete installation. Software Functions 4.6.2 Resistive Touch Upon rebooting, the computer automatically finds the new 6000 controller board. The touch screen is connected but not calibrated. Follow the procedures below to carry out calibration. 1.
Page 114
Calibrate This function offers two ways to calibrate your touch screen. ‘Standard Calibration’ adjusts most touch screens. ‘Advanced Calibration’ adjusts aging touch screens. Standard Calibration Click this button and arrows appear pointing to red squares. Use your finger or stylus to touch the red squares in sequence.
Page 115
Step 1. Please select a device then click “Configure”. You can also double click the device too. Step 2.Click “Standard Calibration” to start calibration procedure FABS-8XXB Series User Manual...
Page 116
NOTE: The older the touch screen, the more Advanced Mode calibration points you need for an accurate calibration. Use a stylus during Advanced Calibration for greater accuracy. Please follow the step as below: Step 3. Select Device to calibrate, then you can start to do Advanced Calibration. NOTE: Recommend to use a stylus during Advanced Calibration for greater accuracy.
Page 117
Plot Calibration Data Check this function and a touch panel linearity comparison graph appears when you have finished Advanced Calibration. The blue lines show linearity before calibration and black lines show linearity after calibration. Turn off EEPROM The function disable for calibration data to write in storage Controller.
Page 118
Touch Mode This mode enables and disables the mouse’s ability to drag on-screen icons – useful for configuring POS terminals. Mouse Emulation – Select this mode and the mouse functions as normal and allows dragging of icons. Click on Touch – Select this mode and mouse only provides a click function, and dragging is disables.
Page 119
Multiple Monitors Multiple Monitors support from two to six touch screen displays for one system. The PenMount drivers for Windows 7/8/8.1 support Multiple Monitors. This function supports from two to six touch screen displays for one system. Each monitor requires its own PenMount touch screen control board, either installed inside the display or in a central unit.
Page 120
Enable the multiple display function as follows: 1. Check the Enable Multiple Monitor Support box; then click Map Touch Screens to assign touch controllers to displays. When the mapping screen message appears, click OK. Touch each screen as it displays “Please touch this monitor”. Following this sequence and touching each screen is called mapping the touch screens.
Page 121
“Touch this screen to start its calibration” appears on one of the screens. Touch the screen. “Touch the red square” messages appear. Touch the red squares in sequence. Continue calibration for each monitor by clicking Standard Calibration and touching the red squares.
Page 122
Control Panel Open Control Panel Windows Beep Setting Beep function for each device Right Button When you select this function, a mouse icon appears in the right-bottom of the screen. Click this icon to switch between Right and Left Button functions.
Need help?
Do you have a question about the FABS-8 B Series and is the answer not in the manual?
Questions and answers