4.5.4
Hardware Monitor
The items in this submenu displays the hardware monitor values automatically
detected by the BIOS. It also allows you to change CPU Q-Fan feature-related
parameters. Select an item then press <Enter> to display the configuration
options.
Q-Fan Controller
Vcore voltage
3.3V Voltage
5V Voltage
12V Voltage
CPU Temperature
M/B Temperature
CPU Fan Speed
CPU Fan Speed Warning
F1:Help
ESC: Exit
Q-Fan Controller [Enabled]
Allows you to enable or disable the Q-Fan controller. Configuration options:
[Disabled] [Enabled]
Vcore Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage [xxxV] or
[Ignored]
The onboard hardware monitor automatically detects the voltage output through
the onboard voltage regulators.
CPU Temperature [xxxºC/xxxºF]
MB Temperature [xxxºC/xxxºF]
The onboard hardware monitor automatically detects and displays the motherboard
and CPU temperatures.
CPU Fan Speed [xxxxRPM]
The onboard hardware monitor automatically detects and displays the CPU
fan speed in rotations per minute (RPM). If the fan is not connected to the
motherboard, the field shows N/A.
4-32
Phoenix-AwardBIOS CMOS Setup Utility
Power
Hardware Monitor
↑↓ : Select Item
→←: Select Menu
[Enabled]
[1.26V]
[3.32V]
[5.10V]
[12.09V]
47ºC
32ºC
2177 RPM
[600 RPM]
-/+: Change Value
Enter: Select SubMenu
Select Menu
Item Specific Help
Press [Enter] to
enable or disable
F5: Setup Defaults
F10: Save and Exit
Chapter 4: BIOS setup