Security - Asus P2-P5N9300 User Manual

OS Select For DRAM > 64MB [Non-OS2]
Set this item to [OS2] only when you are running on an OS/2 operating system
with an installed RAM of greater than 64 MB. Configuration options: [Non-OS2]
[OS2]
Full Screen LOGO [Enabled]
Allows you to enable or disable the full screen logo display feature.
Configuration options: [Disabled] [Enabled]
Set this item to [Enabled] if you want to use the ASUS MyLogo2™ feature.
Halt On [All Errors]
Allows you to set the error report type.
Configuration options: [All Errors] [No Errors]
4.6.3

Security

Main Extreme Tweaker
Supervisor Password
User Password
Password Check
Supervisor Password
User Password
These fields allow you to set passwords:
To set a password:
1. Select an item then press <Enter>.
2. From the password box, key in a password which consists of up to eight
alphanumeric characters, then press <Enter>.
3. Confirm your password when prompted, then press <Enter>. The password
field shows Set.
ASUS P2-P5N9300/P4-P5N9300
Phoenix-AwardBIOS CMOS Setup Utility
Boot Tools
Security
Clear
Clear
[Setup]
Exit
Item Specific Help
Supervisor password
controls full access,
<Enter> to change
password.
Select Menu
4-35