Apm Configuration - Asus P2-P5N9300 User Manual

4.5.3

APM Configuration

Restore on AC Power Loss
Power On By PS/2 Mouse
Power On By PS/2 Keyboard
ACPI AWAY Mode
PWR Button < 4 secs
Power On By PCIE Devices
Power On By External Modems
Power On by RTC Alarm
x Date (of Month) Alarm
x Alarm Time (hh:mm)
HPET Support
WDRT Support
F1:Help
ESC: Exit
Restore on AC Power Loss [Power-Off]
Allows you to enable or disable the Restore on AC Power Loss function.
Configuration options: [Power-Off] [Power-On] [Last State]
Power On By PS/2 Mouse [Disabled]
When setting this item to [Enabled], you can use the PS/2 mouse to turn on the
system. This feature requires an ATX power supply that provides at least 1A on the
+5VSB lead. Configuration options: [Disabled] [Enabled]
Power On By PS/2 Keyboard [Disabled]
Allows you to use specific keys on the keyboard to turn on the system. This
feature requires an ATX power supply that provides at least 1A on the +5VSB lead.
Configuration options: [Disabled] [Space Bar] [Ctrl-Esc] [Power Key]
ACPI AWAY Mode [Disabled]
Allows you to enable or disable the ACPI away mode.
Configuration options: [Disabled] [Enabled]
PWR Button < 4 secs [Instant-Off]
Allows you to set the event after the power button is pressed for more than 4
seconds. Configuration options: [Suspend] [Instant-Off]
Power On By PCIE Devices [Disabled]
When setting this item to [Enabled], you can wake the system through a PCI
Express card. This feature requires an ATX power supply that provides at least 1A
on the +5VSB lead. Configuration options: [Disabled] [Enabled]
4-30
Phoenix-AwardBIOS CMOS Setup Utility
Power
APM Configuration
↑↓ : Select Item
→←: Select Menu
[Power-Off]
[Disabled]
[Disabled]
[Disabled]
[Instant-Off]
[Disabled]
[Disabled]
[Disabled]
3
0 : 0 : 0
[Enabled]
[Enabled]
-/+: Change Value
Enter: Select SubMenu
Select Menu
Item Specific Help
Press [Enter] to
select whether or not
to restart the system
after AC power loss
F5: Setup Defaults
F10: Save and Exit
Chapter 4: BIOS setup