Sata 1-2 - Asus P2-P5N9300 User Manual

4.3.3

SATA 1-2

While entering Setup, the BIOS automatically detects the presence of SATA
devices. There is a separate submenu for each SATA device. Select a device item
then press <Enter> to display the SATA device information.
Main
PIO Mode
UDMA Mode
SATA 1
Access Mode
Capacity
Cylinder
Head
Sector
Transfer Mode
F1:Help ↑↓ : Select Item
ESC: Exit →←: Select Menu
The BIOS automatically detects the values opposite the dimmed items
(Capacity, Cylinder, Head, Sector, and Transfer Mode). These values are not
user-configurable. These items show 0 if no SATA device is installed in the system.
PIO Mode [Auto]
Selects the PIO mode. Configuration options: [Auto] [Mode 0] [Mode 1] [Mode 2]
[Mode 3] [Mode 4]
UDMA Mode [Auto]
Selects the UDMA mode. Configuration options: [Disabled] [Auto]
SATA 1 [Auto]
Allows you to enable or disable SATA 1. Configuration options: [None] [Auto]
[Manual]
Access Mode [Auto]
Sets the sector addressing mode. Configuration options: [CHS] [LBA] [Large]
[Auto]
Before configuring a hard disk drive, ensure that you have the correct
configuration information supplied by the drive manufacturer. Incorrect settings
may cause the system to fail to recognize the installed hard disk.
ASUS P2-P5N9300/P4-P5N9300
Phoenix-AwardBIOS CMOS Setup Utility
SATA 1
[Auto]
[Auto]
[Auto]
[Auto]
0 MB
0
0
0
None
-/+: Change Value
Enter: Select SubMenu
Select Menu
Item Specific Help
F5: Setup Defaults
F10: Save and Exit
4-17