Advertisement
Quick Links
Advertisement
Related Manuals for Dancover Pagoda 4x6m
Summary of Contents for Dancover Pagoda 4x6m
- Page 1 Manual Pagoda 4x6m & 4x8m 19-06-2014-SH...
-
Page 2: Safety Advice
Note: Marquees are intended for events and other arrangements and are as such only meant for short term temporary assembly and the following disassembly. Dancover warranty applies only to the normal use of the Product, normal wear and tear excepted, in accordance with written use instructions or manual. -
Page 3: Part List
Part List Part NO. Part 4x6m 4x8m 19-06-2014-SH... - Page 4 Part List M8X50 19-06-2014-SH...
- Page 5 Assembly 4x6m 4x8m Step1: Lay out and connect the square as shown above. Step2: Fasten the connections. 4x6m 4x8m...
- Page 6 Assembly Step3: Set up the top as shown above. NO.1 and 11 assembled by NO.5. Step4: Put NO.10 through the top rings (NO.8) Step5: Put the roofcover(NO.24) on the roof structure. Step6: Use the legs to raise the top one side at a time. Step7: Secure the legs to the ground with the stake pegs (NO.13).
- Page 7 Assembly Step9: Use NO.12 to tighten the roofcover as shown above and fasten with NO.19. Step10: Connect leg cover with sidewall and endwall by Velcro as shown. Step11: Use part NO. 16 through the eyelet directly above the zipper and around pipe 2 or pipe 3 to keep the zipper aligned.
Need help?
Do you have a question about the Pagoda 4x6m and is the answer not in the manual?
Questions and answers