Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Dancover PARTY TENT SEMI PRO CombiTent 8m Series
Summary of Contents for Dancover PARTY TENT SEMI PRO CombiTent 8m Series
- Page 1 PARTY TENT SEMI PRO, CombiTent 8m Series - Side height 2,6m 22-10-2014-SH...
-
Page 2: Safety Advice
Note: Marquees are intended for events and other arrangements and are as such only meant for short term temporary assembly and the following disassembly. Dancover warranty applies only to the normal use of the Product, normal wear and tear excepted, in accordance with written use instructions or manual. - Page 3 8m Series -2,6 PARTY TENT SEMI PRO, CombiTent Dimention 8x16m Quantity 50X1.5MM 2188MM 37x1.1mm 1880mm 50X1.5MM 1950MM 25x0.8mm 750mm 25x0.8mm 1987mm 50X1.5MM 400MM 110°Three-way 140°Three-way 140°Four-way 10-1 110°Four-way 10-2 6 no rings 8 no rings 22-10-14-SH...
- Page 4 8m Series -2,6 PARTY TENT SEMI PRO, CombiTent Flat Threeway Flat fourway Foot base for corner on right Foot base for corner on left Foot base 15-1 sidewall 15-2 Foot base for endwall Turnbuckle set for side 22-10-14-SH...
- Page 5 8m Series -2,6 PARTY TENT SEMI PRO, CombiTent Turnbuckle set for roof surperpeg 6x300mm spiral 6x180mm 4x180mm Long bungeeball Short bungeeball rope M6X30mm screw +nut 22-10-2014-SH...
- Page 6 8m Series -2,6 PARTY TENT SEMI PRO, CombiTent M8x50mm screw M8x60mm screw locknut spancer roof (4 sections) sidewall endwall with large door endwall with small door 22-10-2014-SH...
- Page 7 8m -2.3 PARTY TENT SEMI PRO, COMBITENT CombiTent roof explanied 2m section with 4m section with gable gable 2m section with 2m section without 4m section with gable gable gable 8x10 2m section with 4m section without gable 4m section with gable gable 8x12...
- Page 8 8x12 -2,6 PARTY TENT SEMI PRO, CombiTent Select a flat ground for the tent, unpack the carton and check all the parts including Attach one end of supported pole (4.5) to the joints (8.11&9.12) tubes, tent and accessories… etc. are present as same as list. Assemble the framework of rooftop by joining the portion (7.8.9.10.11.12.) together with poles (2.3).To ensure the screw fixed to every pole tightly Fastening the roof by using turnbuckle set(18) which is diagonally across through...
- Page 9 8x12 -2,6 PARTY TENT SEMI PRO, CombiTent Cover the roof on the frame ,and attach it by the bungee balls properly ,take care of Attach the another supported poles (6) to the joints (7.10), built-up the framework ,use the tension of the bungee balls ,for if you use too many on one side of tent ,it may too the long peg to fix each pole into the ground and connect leg cover with sidewall and tight to tie the other side of it .Apply legs in one side as shown.
- Page 10 8x12 -2,6 PARTY TENT SEMI PRO, CombiTent spread the wall panel and door panel attach to framework by using the bungee cords The Guy lines clasp to each corner of tent and another end of line fix to ground by clasping the frame to grommets that is construct over the wall panel and door panel to pegs.
-
Page 11: Contact Information
Nederland: 0 858 880 524 suomi@dancover.com nederland@dancover.com Poland: 22 300 8602 Ireland: 0 151 33 003 polska@dancover.com ireland@dancover.com Luxembourg: +49 041 0266 7040 Belgium: 0 28 08 08 09 luxembourg@dancover.com belgique@dancover.com Portugal: 308 800 899 portugal@dancover.com Dancover is a registered trademark of Dancover PLC.
Need help?
Do you have a question about the PARTY TENT SEMI PRO CombiTent 8m Series and is the answer not in the manual?
Questions and answers