Advertisement
Quick Links
Advertisement
Related Manuals for Dancover PRO XL
Summary of Contents for Dancover PRO XL
- Page 1 Manual Storage Tent PRO 4m Series PVC/PE 16-12-2019...
-
Page 2: Safety Advice
The tent must be totally dry before you repack and store it to avoid mildew. Note: Dancover warranty applies only to the normal use of the Product, normal wear and tear excepted, in accordance with written use instructions or manual. The warranty does not apply to damage caused by accident, abuse, misuse, or modification of the Product. - Page 3 Warning 1. In order to avoid being rusted by air, oil is covered on the surface of the pipes. Before setting up the tent, please remove the oil carefully first to keep the cover clean. 2. Take note that the tent needs to be handled carefully to avoid damage. 3.
- Page 4 Part no. 4x10m 4x12m Middle leg 1600mm 50-50 Frame pole 1880mm 38-38 Frame pole 1780mm 50-50 Frame pole 2030mm 50-50 Ceiling rail 2025mm 32-32 Diagonal support 1720mm 32-32 Roof support 1715mm 25-25 Frame pole 2030mm 50-50 Diagonal support 800mm 32-32 Female doorbar 2025mm 32-32 Lower leg...
- Page 5 Part no. 4x10m 4x12m 3-way conntector 54-42 4-way connector 54-42 3-way connector for corner 3-way connector for corner 3-way connector for sidewall 2-way connector for endwall Ceiling rail 1430mm 32-32 Bracket Groundbracket Strengthen bar 1855mm 25-25 Turnbuckle for door 5130mm Turnbuckle for roof 2840mm Turnbuckle for...
- Page 6 Part no. 4x10m 4x12m 10x350mm Spiral peg Small peg Bungeeball long M6 wingnut Screw M6x30mm Screw M6x45mm Screw M6x65mm M6 nut Spanner Tie down Steel clip Screw M8x50mm Screw M8x65mm M8 nut 16x600mm M12 washer 16-12-2019...
- Page 7 Part no. 4x10m 4x12m M12 nut Screw M12x48mm Screw M12x65mm Sheaved block 1 wheel Sheaved block 2 wheel Ratchet stape Roof Endwall 16-12-2019...
- Page 8 Part 31 Part 32 Part 39 Part 40 Part 41 Part 33 Part 34 Part 35 Part 43 Part 44 Part 45 Part 46 M6x30 M6x45 M6x65 M8x50 M8x65 M12x48 M12x65 4x10-12x3.5m storage pro Wing nut Screw Screw (Ø42) Screw (Ø54) Screw Screw Washer...
- Page 9 tubes, tent and accessories... etc. are present and the same as the list. Assemble the framework of rooftop by joining the portion (A, B) together with poles (2, 4, 8) NO. 11 is on four corners for diagonal pipe. across through each section as below. Attach one end of supported pole (3) to the joints.
- Page 10 Attach the other supported poles (1, 2, 11) to the joints, built-up the framework. NO. 11 is on four corners for diagonal pipe. You facilitate the assembly and dismantling by pulling the roof with ropes on tent frame. Use the steel clips to fasten the cover to the frame.
- Page 11 Spread the wall panel and door panel attach to framework by using the bangee cords clasping the frame to grommets that is construct over the wall panel and door panel to ensure stability. Also use the short pegs to fix the doors to the ground.
-
Page 12: Contact Information
Contact information Head office: Dancover A/S For more information Nordre Strandvej 119 G please visit: 3150 Hellebæk www.dancovershop.com Denmark National contact Denmark: 70 26 76 20 Spain: 911 436 828 denmark@dancover.com espana@dancover.com UK: 020 8099 7570 Italy: 02 479 21 198 uk@dancover.com...
Need help?
Do you have a question about the PRO XL and is the answer not in the manual?
Questions and answers