Note: Marquees are intended for events and other arrangements and are as such only meant for short term temporary assembly and the following disassembly. Dancover warranty applies only to the normal use of the Product, normal wear and tear excepted, in accordance with written use instructions or manual.
Page 5
Assemble Manual STEP 1 carton and check all the parts including tubes, tent and accessories... etc. are present as same as list. Assemble the framework of rooftop by joining the portion (6.7.8) together with pole tightly. STEP 2 Complete the roof structure. Strengthen the whole roof structure by steel wires (13.14).
Page 6
STEP 4 Attached all legs in to the connector, and STEP 5 Hang all the sidewalls. Connect the leg covers to the sidewalls and endwalls with velcro as shown. Warning: 1. In order to avoid being rusted by air, oil is covered on the surface of the pipes, before set up 2.
Need help?
Do you have a question about the Pagoda Marquee UNICO 7x7m and is the answer not in the manual?
Questions and answers