Page 2
5x8m Garage Installation Instruction Metal Garage Owner's Manual Instructions for Assembly Size 5x8m...
Page 3
SAFETY AND HAZARD INSTRUCTIONS CAUTION : Read the following safety warnings and all instructions in their entirety prior to installation. WARNING: Metal parts may get hot when exposed to high heat or direct sunlight. Avoid contact with skin and wear protective gloves and clothing to prevent the possibility of burns.
Sep#1.Base Installation Measure and install base as following. Make sure diagonal dimentsions should be equal. Note:Don't fix the anchor bolt now. FB04 Back FB01 Left FB03 FB02 Diagonal dimensions should be equal FB01 FB01 FB02 FB03-1 FB04-1 Right FB01 Front...
Sep#2.Post installation Assemble 11 pcs posts and plug in pins.(as following) Back FP01 Left FP01 FP-1 FP01-1 Right Front...
Page 9
Sep#3.Roof frame installation Make 2pcs roof frame as a whole one 4.88m. Lift and assemble roof frame between 2 posts.(as following) Left Back Right Front...
Page 10
Sep#4.Roof and side wall purlin installation Assemble roof purlin between 2 roof frames. posts. Then assemble wall purlin between 2 Left Back WB-1 WB-1 Right Front Note: Adjust the frame. Now fix the 6pcs S0.
Sep#6.Wall panel installation Back RP01 RP01 WP01-1 WP01-1L Fig.1 WP01-2 WP01-2L WP01-3L WP01-3 Left Fig.3 WP01-4L WP01-4 Left Back Fig.2 Front Right RP01 WP01 Left Back...
Page 14
Sep#7.Roller door installation FP-1 DC FP-1 FP-1 Front Front Front...
Page 15
Sep#8.Front panel installation WP02-3 WP02-1 WP02-1L Fig.3 WP02-2 WP02-2L WP02-4 Fig.1 WP02-3L Front Front WP02-4L Fig.2 Front...
Page 16
Sep#9.Panel door installation Dia.10mm Dia.16mm Dia.16mm Front...