Quick Videotape Playback - Magnavox MRV700VR - Dvd Recorder / Vcr Owner's Manual

E9490UD_EN.qx3 04.9.21

20 Quick Videotape Playback

Read and follow the steps below to play a videotape.
1
Turn on the TV. Set it to channel 3 or 4 or its AUDIO/VIDEO
IN channel. This depends on how you connected the Recorder to a
TV. See pages 10-14.
2
With the Recorder power off, insert a videotape in the
cassette compartment of the Recorder.
on the front of the Recorder.
If the power is already on, press VCR to put the Recorder in VCR
mode.The VCR light will appear on the front of the Recorder.
3
Press PLAY
B.
4
Press STOP C to stop playback.
5
Press PREV/REW
6
After the videotape stops, press OPEN/CLOSE/EJECT
remove the videotape.
10:54 AM Page 20
The VCR light will appear
H to rewind the videotape.
1
Turn on the TV.
2 Insert a videotape in the
cassette compartment.
6
5
A to
• You must connect the Recorder
to a TV using the RF coaxial
cable or composite video in
order to use the VCR features.
These hookups are explained on
pages 10 and 14.
• If you are using the S-VIDEO or
COMPONENT VIDEO OUTPUT
to view videotape, please DO
NOT use the DVD module.This
will affect optimum playback
quality.
3
4
Helpful Hint