E9490UD_EN.qx3
04.9.21
Access Control limits viewing of Discs that exceed the limits you set.This
feature will not limit viewing if the Disc manufacturer did not code the Disc.
Magnavox cannot guarantee the availability of Access Control with all Discs,
and therefore denies any liability associated with unintended watching of
Discs. Make sure your Discs play according to your Access Control settings
before you allow children access to the Recorder.
G
Before you begin, make sure the Recorder is in DVD mode. Press DVD so
the DVD light appears on the front of the Recorder.
Change Code
1
Press SYSTEM MENU. Press
corner of the menu bar at the top of the TV screen.
2
Press
L repeatedly to select
press B. Access control will be selected.
3
Press
B again, then press the Number buttons to enter your
old four-digit code. When doing this the first time, enter any four
numbers you prefer.You will have to enter the same code, exactly,
twice.This will set your code for the first time.
W
X
~
1
2
Access control
Auto resume
Finalize disc
4
Press
L repeatedly to select Change code, then press B.
W
X
~
1
2
Access control
Auto resume
Finalize disc
5
Press four Number buttons to enter the new four-digit code.
Then, enter it again - exactly - to confirm it.
menu will reappear.
W
X
~
1
2
Access control
Auto resume
Finalize disc
6
Press SYSTEM MENU to remove the menu.
10:54 AM
Page 57
s to select
on the second screen, then
Y
Z
a
1en
off
no
off
s
[ ] [ ] [ ] [ ]
Enter code
Y
Z
a
1en
off
no
off
s Child lock
[ ]
Parental level
[ ]
Change country
[ ]
Change code
K
B [ ]
Y
Z
a
1en
off
no
off
s
[ ] [ ] [ ] [ ]
Enter code
in the top left
The Access control
Access Control 57
1,6
1-4
3,5
Helpful Hints
• The code may not go into effect
until you activate Child Lock.
(You may have to keep
confirming the code.) See page
58 to activate Child Lock.
• Finalize disc will appear in this
menu only when a non-finalized
DVD+R is in the Recorder. See
page 55.