Initial Setup - Magnavox MRV700VR - Dvd Recorder / Vcr Owner's Manual

E9490UD_EN.qx3 04.9.21

18 Initial Setup

Initial Setup screens will appear the very first time you turn on the Recorder.
These on-screen messages and menus will help you set up Recorder features
quickly, including TV channels and language options.
During Initial Setup,"IS TV ON? C03" will appear on the Recorder's
display panel.The Initial Setup information shows on your TV.
"IS TV ON? C03" indicates you should turn on your television and
set it to channel 3 or the correct Video In channel. Even though
your TV may be on, you must set it to the correct Video In channel
to see the Initial Setup messages. See pages 9-16 to determine the
correct Video In channel for your connection. Or, check your TV
owner's manual for details.
Follow the steps below to set up the Recorder. You cannot turn off the
Recorder until you finish the Initial Setup.The only way to quit the
Initial Setup is to disconnect the power cord. If you quit, the Initial
Setup screens will appear again the next time you turn on the
Recorder.The screens will not go away until you finish the Initial
Setup. Also, you cannot open the Disc tray while "IS TV ON? C03"
appears. ("INSTALL RECORDER FIRST" will show on the display panel.)
If the setup screens do not appear, your Recorder has been set up previously.
You can change setup items later. See the pages listed at each step below for
each feature.
1
Press STANDBY-ONy y to turn on the Recorder.
2
The Menu Language screen will appear first. Press K K or L L to choose
English, Español, or Français, then press the OK button.
The Recorder's menus, displays, and messages will be in the language
you selected.
To change the Recorder's Menu Language later, see page 66.
~
Menu Language
English
Español
Français
Press OK to continue
3
The Audio Language menu appears next. Press K K or L L to choose
the language you prefer, then press OK.
The Recorder will play Discs in this language if it is on the Disc.The
DVD Disc menu will appear in the same language if available.
Some Discs require you to choose the audio language or the Disc
Menu language from the Disc menu.The Disc preferences or
defaults may override your selection in the Recorder's Audio
Language menu.
To change the Audio Language later (as Playback Audio), see pages 37
and 66.
~
Audio Language
English
Español
Français
Português
Italiano
Press OK to continue
10:54 AM Page 18
Initial Setup
K
L
Initial Setup
K
L
1
2-3
Helpful Hint
• The Recorder's features will
scroll across the display panel
when you first connect the
power cord.This is a
demonstration that cannot be
cancelled. It will not appear
anymore after you set up the
Recorder.