Playback; Start Recording; Vcr To Dvd/Dvd To Vcr - Magnavox ZV420MW8 - DVDr/ VCR Combo Owner's Manual

VCR to DVD
4
Use [K / L] to select "VCR DVD",
then press [OK].
General Setting

Playback

Display
Video
Recording
Dubbing Mode
Clock
VCR
Reset All
DVD
5
Press [SETUP] to exit.
Press [VCR].
6
Press [PLAY B]. Then press
[PAUSE F] at the point you wish to

start recording.

• Since it takes about a few seconds before the
actual dubbing begins, please allow extra 5
seconds when selecting the starting point.
7
Press [DVD].
Make sure to select a recording mode using
[REC MODE].
8
Press [D.DUBBING].
VCR to DVD duplication will start.
9
Press [STOP C] to stop the recording.
Title list will automatically appear.
• If you want to watch the duplicated material
after the VCR to DVD duplication, press [OK]
and then select "Play" in the title.
Note
• When you turn off the unit after setting the dubbing mode to DVD
automatically.
• You cannot change the output mode during VCR to DVD or DVD to VCR duplication.
For Audio CD to VCR duplication:
• This function is available on Audio CD, not MP3 files.
For VCR to DVD duplication:
• The playback sound mode is followed by the setting of VCR playback sound mode on page 81. Set the playback
sound mode to which you wish to record to the DVD.
• This unit will automatically stop the duplication if playback with no image is for more than 3 minutes during VCR
to DVD duplication.
• Dubbing indicator will appear on the front panel display during dubbing.
40 40 EN EN
DUBBING MODE
Auto Chapter
Auto Finalize
Dubbing Mode
Make Recording Compatible
DVD
VCR
DVD to VCR
4
Use [K / L] to select "DVD VCR",
then press [OK].
General Setting
Playback
Display Auto Chapter
Video Auto Finalize
Recording Dubbing Mode
Dubbing Mode
Clock Make Recording Compatible
VCR DVD
Reset All
DVD VCR
5
Press [SETUP] to exit.
Press [DVD].
6
Press [PLAY B]. Then press
[PAUSE F] at the point you wish to
start recording.
7
Press [VCR].
Make sure to select a recording mode using
[REC MODE].
8
Press [D.DUBBING].
DVD to VCR duplication will start.
9
Press [STOP C] to stop the recording.
VCR, the setting will be set to VCR DVD