Nuna rava Instruction Manual

IMPORTANT!
KEEP THESE INSTRUCTIONS FOR
FUTURE REFERENCE:
READ CAREFULLY
WARNING: Carefully read and understand all instructions
and warnings in this manual, the manual that comes with child
restraint, and those labeled on your child restraint. Failure to do so
can result in the SERIOUS INJURY or DEATH of your child.
WARNING
DEATH OR SERIOUS INJURY CAN OCCUR
Perform the steps in this document, carefully and completely, and
always follow the owners manual for use and installation.
Keep screwdriver and brush away from child. Tools are not
intended to be toys.
Keep screwdriver, brush and instructions for future use.
Cleaning the Seat Pad and Head Support Cover
When required, seat pad and head support cover may be machine washed with cold
water and mild detergent, on the delicate cycle.
Allow to air dry.
DO NOT use bleach or other harsh chemicals to clean your child restraint seat pad
and head support cover.
DO NOT attempt to iron your child restraint seat pad or head support cover.
Clean the Harness Adjuster
Harness adjuster can be cleaned at any time with included tool and following the
Step 3:
Clean Harness Adjuster steps 1-8.
Contact
For replacement parts, service, or additional warranty questions, please contact our
customer service department.
In the USA:
infousa@nunababy.com
www.nunababy.com
1.855.NUNA.USA
Parts List
Make sure all parts are available before assembly. If any part is missing,
please contact Nuna (see back cover for information). Tools included.
1 Seat Pad
2 Head Support Cover
1
2
3 Screw Driver
4 Cleaning Brush
3
4