Page 2
Cleaning and Maintenance WARNING: Do not attempt to disassemble the Child Restraint. Only perform steps shown in this manual. Seat Cover Removal 1 To remove seat pad: (1) a Recline Child Restraint to rear facing position 1 (BLUE). b Set Head Support in highest position.
Page 3
4 Unsnap Seat Cover. (3) 5 Remove Seat Cover from Calf Support. 6 Remove Seat Cover from beneath Harness Release Button frame. (4) a Grasp the Seat Cover at the top of the Harness Release Button. b Pull away from Button (toward seat back) and up.
Page 4
a Recline Child Restraint to rear facing Position 1. Plastic tab b Tuck the seat cover into the retaining channel along the edge of the seat and tuck the corner flap in near the screw (7). c From the center of the seating area, push the Screw white plastic tab (7) on...
Page 5
Cleaning the Infant Insert 1 When required, the Infant Insert may be machine washed with a mild soap and cold water. The support wedge located on the back side of the Infant Insert should be spot cleaned only. DO NOT machine wash the support wedge. 2 Allow to air dry.
Need help?
Do you have a question about the rava and is the answer not in the manual?
Questions and answers