Sumake SMT-50PHD Operation And Maintenance Manual

Transducerized dc pistol вс40м brushless electric screwdriver - down power input, transducerized dc pistol вс40м brushless electric screwdriver - upper power input

Advertisement

Quick Links

OPERATION AND MAINTENANCE MANUAL
SMT-50PHD, SMT-90PD, SMT-120PD
ITEM NO.:
TRANSDUCERIZED DC PISTOL DC40V BRUSHLESS
ELECTRIC SCREWDRIVER - DOWN POWER INPUT -
SMT-50PHU, SMT-90PU, SMT-120PU
TRANSDUCERIZED DC PISTOL DC40V BRUSHLESS
ELECTRIC SCREWDRIVER - UPPER POWER INPUT -
- DOWN POWER INPUT -
- UPPER POWER INPUT -
SMT-50(90)(120)P-I-2409A

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SMT-50PHD and is the answer not in the manual?

Questions and answers

Summary of Contents for Sumake SMT-50PHD

  • Page 1 OPERATION AND MAINTENANCE MANUAL SMT-50PHD, SMT-90PD, SMT-120PD ITEM NO.: TRANSDUCERIZED DC PISTOL DC40V BRUSHLESS ELECTRIC SCREWDRIVER - DOWN POWER INPUT - SMT-50PHU, SMT-90PU, SMT-120PU TRANSDUCERIZED DC PISTOL DC40V BRUSHLESS ELECTRIC SCREWDRIVER - UPPER POWER INPUT - - DOWN POWER INPUT -...
  • Page 2: Specifications

    Auxiliary Arm ST-TAIS030SB、 ST-TAIS050SB Bit Type B9.5 W3/8 B9.5 W3/8 B9.5 W3/8 * 1N.m=10.2Kgf.cm 1N.m=8.85Lbf.in Accessories BIT Type: SMT-50PHD, SMT-50PHU with BIT 2 Pcs. SMT-90PD, SMT-90PU with BIT 2# & 3# 1 Pcs. Each SMT-120PD, SMT-120PU with BIT 2# & 3# 1 Pcs.
  • Page 3: Important Safety Information Enclosed

    NOTICE Metal Assembly sensor screwdriver is designed for installing threaded fasteners in light industrial and appliance manufacturing applications. SUMAKE is not responsible for customer modification of tools for applications on which SUMAKE was not consulted. WARNING Important safety information enclosed.
  • Page 4: Important Safety Rules

    Important Safety Rules WARNING! Read all instructions Failure to follow all instructions listed below may result in electric shock fire and/or serious injury. The term “power tool” in all of the warning listed below refer to your mains operated (corded) power tool or battery operated (cordless) power tool.
  • Page 5 Inspect extension cords periodically and replace, if damaged. f) Keep cutting tools sharp and clean, Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. g) Use the power tools, accessories and tool bits etc., in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed.
  • Page 6: Do Not Operate This Tool Without Protective Earth Connected

    Grounding Instructions 1、This tool should be grounded while in use to protect the operator from electric shock. NOTICE! To ensure the grounding result, the grounding conductor of the power cord must be well connected with the grounding terminal of power facility. This tool is equipped with grounding conductors.
  • Page 7 Operations Cautions 1) Do not allow chemicals such as acetone, benzene, thinner, trichloroethylene ketone, or other similar chemicals to come in contact with the sensor screwdriver housing as damage will result. 2) Use the sensor screwdriver carefully, do not drop or be impacted, it is best to use a balancer to lift it, and set it on the auxiliary arm for operation.
  • Page 8: Function / Operating Introduction

    Help to fix on the auxiliary arm Changeover Switch Switch rotation direction CW/CCW Press-plate Start Press to start the screwdriver 1) Start Mode: Set the start mode on the controller MODEL SMT-50PHD, SMT-50PHU SMT-90PD, SMT-90PU SMT-120PD, SMT-120PU    (1) Independent press-plate mode ...
  • Page 9: Maintenance And Inspection

    Stop the sensor driver first and adjust it with the SMT-C1B controller. CAUTION 1. The use of other than genuine SUMAKE replacement parts may Result in decreased tool performance and increased maintenance and may invalidate all warranties. 2. All repairs and maintenance of this tool and its word must be performed by an authorized service center.
  • Page 10: Eu Declaration Of Conformity (Doc)

    4F, No. 351, Yangguang St., Neihu District, Taipei City, Taiwan declare in sole responsibility that the equipment Equipment: ELECTRIC SCREWDRIVER Model/ Serial No.: SMT-50PHD, SMT-50PHU, SMT-90PD, SMT-90PU, SMT-120PD, SMT-120PU The object of the declaration described above is in conformity with the relevant union harmonization legislation: ...
  • Page 12 NOTE www.SUMAKE.com www.aircompressors.com.tw...

This manual is also suitable for:

Smt-90pdSmt-120pdSmt-50phuSmt-90puSmt-120pu

Table of Contents