Advertisement
Quick Links
SUMAKE
Specification:
Free Speed
Capaicyt Bolt Size
Torque
Dia.
Overall Length
Air Inlet (PT)
Air Hose (I.D.)
Air Pressure
Net Weight
SUMAKE INDUSTRIAL CO., LTD
4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91
PNEUMATIC TOOLS
Lever Operated Ind.
Screwdriver
ST-6SSLD
8,000 r/min
6mm
9.8 – 18 N-m
1-7/8" (45 mm)
8" (202 mm)
1/4" (6.35 mm)
1/4" (6.35 mm)
90 psi (6.3 bar)
2.2 lbs (1.0 kg)
Noise and Vibration:
Vibration
EN ISO 28927-2
Sound Pressure Level
No load: 90 dB(A)
No Load:
2.6 m/s²
Sound power level
No load: 101 dB(A)
Uncertainty
²
K= 1.5 m/s
Noise
Remark
EN ISO 15744
Please always
wear ear
protector at
environment
noise level > 80
dB(A) due to
risk of impaired
Uncertainty
hearing!
K= 3dB
ST-6SSLD-S-1804B-NRF
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Sumake ST-6SSLD
Summary of Contents for Sumake ST-6SSLD
- Page 1 Air Hose (I.D.) 1/4” (6.35 mm) risk of impaired Uncertainty Uncertainty Air Pressure 90 psi (6.3 bar) hearing! ² K= 1.5 m/s K= 3dB Net Weight 2.2 lbs (1.0 kg) SUMAKE INDUSTRIAL CO., LTD 4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91 ST-6SSLD-S-1804B-NRF...
-
Page 2: Ec Declaration Of Conformity
DECLARATION OF CONFORMITY SUMAKE INDUSTRIAL CO., LTD. 4F, No. 351, Yangguang St., Neihu District, Taipei City, Taiwan declare in sole responsibility that the equipment Equipment： LEVER OPERATED IND. SCREWDRIVER Model/ Serial No.：ST-6SSLD to which this declaration applies, complies with these normative documents: ... - Page 3 ST-6SL(SLD)(SSL)(SSLD)-I-0509A-NR...
- Page 4 ST-6SL(SLD)(SSL)(SSLD)-P-0509A-NR...
- Page 5 SCREWDRIVER Original instructions SUMAKE Industrial Co. Ltd.
- Page 6 Possible direct or indirect consequential damages are not the responsibility of SUMAKE Industrial co., Ltd. General safety rules: Watch the tool at all times when in use.
- Page 7 2. While using an assembly power tool for threaded fasteners, the operator should adopt a comfortable posture whilst maintaining secure footing and avoiding awkward or off-balanced postures. The operator should change posture during extended tasks, which can help avoid discomfort and fatigue. 3.
- Page 8 General preparation and connection: When using brand-new air hose or air pipe. Blow and clean the inside of air hose or pipe before installation. Keep inside of air hose or air pipe clean to prevent airdrop problem caused by the lots of drain and dust accumulated and possibly make the inside diameter smaller in the long use.
Need help?
Do you have a question about the ST-6SSLD and is the answer not in the manual?
Questions and answers