Multitech MultiModem MT5634IND-NAM User Manual page 18

Direct Connection
Use this procedure when you want to connect without first being called back. The password that you use must
be set up for an optional direct connection.
1.
2.
3.
4.
Note:
- character by using the %H1 command
Callback Security Commands
The AT Commands related to Callback to Security are included in the AT Commands Reference Guide included
on MT5634IND MultiModem CD.
Multi-Tech Systems, Inc. MT5634IND User Guide (S000369C)
Downloaded from Elcodis.com electronic components distributor
Using a data communications program such as HyperTerminal or PhoneTools, dial the number of the
callback modem.
When the connection is established, the callback modem responds with the following message:
Password>
Type a direct connection password, press the - key, and then press E
or one minute to enter a valid password.
If the password is valid, the following message appears and the modems establish a working
connection:
OK Connecting
You can make all calls direct connect regardless of whether the password or phone number has the
Chapter 5 – Callback Security
. You have three attempts
NTER
18