Download Print this page

Advertisement

Quick Links

Assembly Video
For a step by step guide on how
to build our Berlin Otoman bed
visit our YouTube channel
'BirleaFurnitureLtd' or
Alterna e ly s can the below
code on your smart phone.
How to scan a QR code from an apple device
Step One: Open up the camera app
Step Two: Hold the device's camera up to the QR code
Step Three: Your Apple devise will automa ally recognise the QR code and
provide you with a link to the video.
How to scan a QR code from an android device
Step One: Download the QR Code reader applica
from the Play Store.
Step Two: Open the QR code applica
and open the camera.
Step Three: Your Android devise will automa ally recognise the QR code
and provide you with a link to the video.
How to scan a QR code from a Window's device
Step One: Open up the camera app
Step Two: Hold the device's camera up to the QR code
Step Three: Your Window devise will automa ally recognise the QR code
and provide you with a link to the video.
Please ensure that you devise is up to date with the latest operag system.
Page 1 of 10

Advertisement

loading
Need help?

Need help?

Do you have a question about the MAISEY Ottoman Bed - KING and is the answer not in the manual?

Questions and answers

Summary of Contents for Birlea MAISEY Ottoman Bed - KING

  • Page 1 Assembly Video For a step by step guide on how to build our Berlin Otoman bed visit our YouTube channel ‘BirleaFurnitureLtd’ or Alterna e ly s can the below code on your smart phone. How to scan a QR code from an apple device Step One: Open up the camera app Step Two: Hold the device’s camera up to the QR code Step Three: Your Apple devise will automa ally recognise the QR code and...
  • Page 2 Birlea selected at random each month. To view our full terms and conditions please visit www.birlea.com Are you happy with your purchase? Yes: That’s great, we would love to hear more from you. Please leave us a review on our social media channels or Trustpilot.
  • Page 3 MAISEY Ottoman Bed - KING Assembly Instructions Before you begin... 1. Please check you have received the correct product. 2. Unpack all boxes and lay out each component on the floor. 3. Check your product for any damage that may be immediately obvious. If damage is identified, please contact your retailer.
  • Page 4 Box 2 Box 1 4. Side Rails (x2) Centre Support Rail (x1) .Headboard (x1) 16. Left Right Frame Rail (x1) Right Frame Rail (x1) Box 3 .Front Frame Rail(x ) 1 . Bed Cross Bar(x1) Back Frame Rail(x Footboard (x1) metal hook (X2) Support Leg (x1) 8.
  • Page 5 .Slats(x .Cross Support Bar(x2) G. M6x16mm Bolts (x10) Woven Fabric (X1 ) Box 4 19. Wings (x2) Step 1 Unpack all components from the boxes and check you are not missing anything. Please check these against the list on page 3 & 4. Should you identify any missing components, please contact the retailer you purchased the bed from. Page 5 of 10...
  • Page 6 Step 2 Using the Allen Key (A), 4x M8x30mm Bolts (B), 4x Spring Washer (C) and 4x Flat Washer (D). DO NOT FULLY TIGHTEN BOLTS DO NOT USE ANY POWER TOOLS AS THIS MAY DAMAGE THE BED FRAME AND WILL INVALIDATE ANY CLAIMS.
  • Page 7 Step 3 To fix the side rails(4) to the headboard(3) and footboard(2) you will need to use hardware parts B,C,D with the M5 allen key(A). To fix the wooden block(1) to the footboard(2) you will need to use hardware parts L with the M5 allen key(A).
  • Page 8 Step 4 To attach the front frame rail(14)and back frame rail(15)to the left frame rail (16)and right frame rail(17), you will need hardware parts J with the M5 allen key(A). To attach the centre support bar(6) to the front frame rail(14)and back frame rail(15),you will need hardware parts H and E with the M5 allen key and the M14 spanner(F).
  • Page 9 Step 6 To attach the pull strap(12) to the back frame rail(15)you will place the pull strap(12)beneath the metal frame and then pull the strap on the inner side of the frame through the strap on the outer side of the frame to form a knot. To assemble the slats(9) place a single plastic cap(M) onto each end of every slat then you need to push centre slat caps(N) into the metal frame.
  • Page 10 Step 8 Attach the wings (8) to the headboard (3) using hardware parts D,E,H and F. D Flat washer x4 (M8x50mm)x4 Bolts E Nuts x4 F Spanner x1 Page 10 of 10...