Analog Devices ICE-1500 User Manual page 9

2 Getting Started
This chapter provides the information needed to begin using Analog Devices emulators.
NOTE: Analog Devices emulators are not intended to be used in a production environment.
This chapter includes the following sections.
•
Contents of Emulator Package
Provides a list of components shipped with the emulator.
•
PC Configuration
States the minimal PC requirements.
•
Emulator Installation
Provides a step-by-step procedure for setting up the emulator hardware and describes how to connect the emu-
lators to your target board.
•
Configurator Software
Describes the target configurator utility.
•
JTAG/SWD Frequency
Provides information on JTAG/SWD frequency limitations.
•
Troubleshooting and Warranty
Points to an Engineer-to-Engineer Note for troubleshooting advice and warranty information.
Contents of Emulator Package
The ICE-1500 emulator package contains the following items:
• ICE-1500 emulator
• USB standard-A to Type-C cable
• 6-inch 0.05" cable assembly
ICE-1500 Emulator
Getting Started
2–1