Analog Devices ICE-1500 User Manual page 2

Copyright Information
©2024 Analog Devices, Inc., ALL RIGHTS RESERVED. This document may not be reproduced in any form
without prior, express written consent from Analog Devices, Inc.
Printed in the USA.
Disclaimer
Analog Devices, Inc. reserves the right to change this product without prior notice. Information furnished by Ana-
log Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its
use; nor for any infringement of patents or other rights of third parties which may result from its use. No license is
granted by implication or otherwise under the patent rights of Analog Devices, Inc.
Trademark and Service Mark Notice
The Analog Devices logo, Blackfin, Blackfin+, CrossCore, EngineerZone, EZ-Board, EZ-KIT, EZ-KIT Lite, EZ-
Extender, SHARC, SHARC+, and VisualDSP++ are registered trademarks of Analog Devices, Inc.
EZ-KIT Mini is a trademark of Analog Devices, Inc.
All other brand and product names are trademarks or service marks of their respective owners.
Regulatory Compliance
The ICE-1500 emulators are designed to be used solely in a laboratory environment. The emulators are not inten-
ded for use as consumer end products or as a portion of consumer end products. The emulator boards are open
system designs which do not include shielded enclosures and therefore may cause interference to other electrical de-
vices in close proximity. These boards should not be used in or near any medical equipment or RF devices.
ICE-1500 Emulator
The emulator contains ESD (electrostatic discharge) sensitive devi-
ces. Electrostatic charges readily accumulate on the human body
and equipment and can discharge without detection. Permanent
damage may occur on devices subjected to high-energy discharges.
Proper ESD precautions are recommended to avoid performance
degradation or loss of functionality. Store unused emulators in the
protective shipping package.
ii