Dell POWER EDGE SC1430 Hardware Owner's Manual page 84

Figure 3-26. Removing and Installing the Card Fan
1 card fan
4 front fan
7 Disconnect the front fan cable from the FAN_FRONT connector on the system board. See Figure 6-2.
8 Remove the cables from the channel at the bottom of the front fan assembly.
9 Unscrew the fan case and lift to remove the front fan assembly from the system. See Figure 3-27.
10 Perform the preceding steps in reverse order to reinstall the fans.
84
Installing System Components
1
5
2 card fan cable
5 full-length card retainer
2
3
4
3 card fan system-board
connector (FAN_CCAG)