Dell POWER EDGE SC1430 Hardware Owner's Manual page 53

Figure 3-10. Cabling a Hard Drive in the Drive Carrier (SAS or More Than Two SATA Drives)
1
1 SAS cable
4 power cable
10 Ensure that all connectors are properly cabled and firmly seated.
Ensure that the SAS cable is connected to the blue primary connector if the SAS controller card has
two connectors.
11 Rotate the hard-drive carrier back into place. See "Rotating the Hard-Drive Carrier Into the System" on
page 46.
12 Close the system. See "Closing the System" on page 43.
2
5
2 hard-drive activity indicator
cable
5 AUX_LED connector
3
4
3 data cable
Installing System Components
53