Temporary Tone Dialing; Headset Jack - VTech 80-5735-00 - V-Tech VT5823 5.8GHz Cordless Phone User Manual

Telephone Operation

Temporary Tone Dialing

If you have pulse (rotary) service, you can change
from dial pulse to touch tone dialing during a call by
pressing * TONE. This is useful if you need to send
touch tone signals for access to telephone banking or
long distance services.
1. Dial the number.
2. Press * TONE. Buttons pressed after this send
touch tone signals.
3. When you end the call by pressing OFF, the
phone automatically returns to pulse service.

Headset Jack

You can use this telephone handsfree when you
install any VTech 2.5 mm headset, purchased
separately.
Plug the headset into the jack located on the right
side of the handset (under the small rubber flap). Do
not force the connection, but make sure the plug fits
securely.
www.vtechphones.com
• Temporary tone
dial mode is use-
ful if you need to
send touch tone
signals for access
to telephone bank-
ing or long distance
services.
• T o p u r c h a s e a
headset, visit us
on the web at www.
vtechphones.com
or call VTech Cus-
tomer Service at
1-800-595-9511.
In Canada, contact
VTech Telecommu-
nications Canada
Ltd. at www.vtech-
canada.com or 1-
800-267-7377.
BASIC OPERATION 13