Frymaster FilterQuick Quick Start

FilterQuick - easyTouch
Quick Start
A: FQ4000: Programma-
ble for automatic filtering.
Press ✓(YES) button to
respond YES to filter
prompt.
B: Power switch:
One in cabinet
under the USB
port.
C: Filter Pan
NOTE: The Frymaster FilterQuick
ing before normal restaurant operations can begin.
F: Pre-Screen Filter
- T fryer requires a start-up, demonstration and train-
®
1. Fill vats with oil to lower fill line.
2. Turn on power switches if applicable (B).
3. Turn controllers on by pressing and holding the
button for two seconds.
4. Controller (A) displays "CHANGE FILTER PAD? YES/
NO".
5. Press ✓ (YES) and controller displays "REMOVE PAN".
6. Remove filter pan (C) and controller displays "CHANGE
FILTER PAD".
7. Change filter and reassemble filter pan, ensuring pan is
out 30 seconds. Re-install filter pan.
8. Position oil container in the right cabinet, placing pick-up
tube in open container (E).
9. Press and hold the top off reset switch until JIB is full or
Top Off Empty display goes out on controller. (D).
10. A "P" indicates the filter pan is not properly placed. Re-
seat the filter pan if necessary until the "P" is not visible.
11. While cooking, respond YES to the Filter Now prompt in
display (A) by pressing the ✓ (YES) button and BLUE
filter button.
12. Respond to the empty oil container Top Off Empty noti-
fication by replacing the oil container (E) and resetting
the top off reset switch (D) or refilling the oil container
with bulk oil system.
D: Top off reset button: Press and
hold after replacing the oil until top
off empty notice goes out.
E: Oil Container: Holds oil for auto-
matic/manual top-off system. It's not
used to fill the vats, just to maintain
the oil level. Use only fresh oil in top
off system.
*8197425*
FRY_QR_8197425 02/2025