Frymaster 1814 Manual

Lane Keys, Multi-Product mode
Press desired lane key and then
desired menu key. Cook cycle is
launched.
Menu Keys
Press a menu key after pressing a lane key. The chosen item is displayed and the cook cycle is launched;
display alternates between menu item and remaining cook time. Keys inactive in dedicated mode.
1814 Cooking Computer—Multi Product Mode
Basic Multi-Product Operation
1. Press ON/OFF key. Status display becomes
LO, changing to dashed lines at setpoint.
2. Press desired lane key (Y, B or R). Display
becomes Prod.
3. Press menu key for desired item. Item is dis-
played and cook cycle is under way.
4. Display alternates between menu item and
remaining time, changing to DONE.
Temperature Key
Press once for current tem-
perature, twice for setpoint,
360°F in multi-product mode.
5. Press lane key to cancel alarm.
6. LED above menu key flashes to indicate
quality time countdown. Press menu key to
cancel quality countdown alarm.
Codes
With the computer displaying off, press check-
mark key to enter codes.
5000: Displays total cook cycles.
5005: Clears total cook cycles.
Checkmark Key
Status Indicator
Used to change modes,
Displays OFF when the fryer is off,
enter programming.
dashed lines at setpoint. Displays Hi,
LO or HOT when the fryer is out of
temperature range.
5050: Sets computer in multi-product mode.
Menu keys are populated and dashed lines ap-
pear when the fryer is at setpoint.
5060: Sets computer in dedicated mode for
fries. FRY displayed in all lanes; menu keys are
inactive.
----
ON/OFF
NOTE: To clear cook cycles begun in
error, press a menu key to start cook
cycle and immediately press and hold
lane key until display clears..
819-6559 AUG 11