K3000: Quick Start
Pressed Indi-
vidually: Scroll
menu, program-
ming options.
Pressed Simul-
taneously:
Launches polish.
Scan programmed
menu items.
ON/OFF
Product Button LED: lit when button is active
ON/OFF
•
Press ON/OFF button fryer heats to setpoint
or idle temperature and displays: COOL or
DROP.
Cooking
•
Fryer displays COOL or DROP
•
COOL display: Press product button; fryer
heats to setpoint and displays DROP.
•
Press product button and drop product.
•
DROP display: Press product button and
drop product.
•
DONE displayed: Press product button to
cancel alarm.
•
Press and hold product button to halt cook
cycle.
819-6591 FEB 2012
Check actual,
setpoint tem-
Exits cool to setpoint.
peratures and
software ver-
sions.
Press blue product
buttons to start a
cook in left display.
Responding to Polish Prompt
•
Computer displays Polish Requested, alter-
nating with Yes No.
•
Press Yes (button under Yes display) and the
polish cycle launches.
Fryer turns off after polish cycle.
Computer Button Navigation
•
Product: Active when adjacent LED is lit.
Press to launch cook cycle. Press and hold to
stop a launched cook cycle. Press at end of
cook cycle to halt alarm.
•
Scan: Press once, all product buttons are lit;
select product displayed. Press product but-
ton to view product name. Press Scan again
to repeat. Press Scan twice to return to nor-
mal operation.
•
Left/Right Arrows (
in left display.
Enter codes, respond to
left-display prompts.
Access Filter Menu
Press white product buttons to start a cook in right display.
•
Up/Down Arrows (
right display.
•
Exit Cool: Set fryer's cook cycle exit tem-
perature to 250°F(121°C) or setpoint.
•
Thermometer: Fryer ON: Press and release
for setpoint/left; vat temp/right.
•
Thermometer: Fryer OFF: Press to display
temperature, time, date, system version,
K3000 version, circuit board versions.
•
Checkmark( ): Fryer OFF: Press and hold
3 seconds: Scroll filter usage; Press and hold
10 seconds: Product setup. (Covered on
back)
•
Checkmark( ): Fryer OFF: Respond to
prompts.
•
Filter: Press and release: Cooks remaining
to filter cycle. Press and hold: Filter options:
): Navigate options
Auto filter, Clean, Dispose, Drain to Pan and
Fill Vat from Pan.
Pressed Individually: Scroll
menu, programming options.
Pressed Simultaneously:
Changes to 2nd language if
configured.
ON/OFF
): Navigate options in
Need help?
Do you have a question about the K3000 and is the answer not in the manual?
Questions and answers