Frymaster FilterQuick FQ4000 easyTouch Programming Manual

Fryer

Table of Contents

Download this manual

FilterQuick Touch FQ4000 Product Programming

DISPLAY

1 6 5 0

1. Press the Home button.

4. Press the √ (check) button.

5. Choose the product icon to edit or press the + to add a

new product.

6. Press the pencil icon at the bottom of the screen to

edit an existing product.

7. Enter or change the name of the product using the

keyboard.

8. Press the √ (check) button.

9. This screen displays the current setpoint, cook time,

sensitivity, hold timer, shake timers and filter settings.

To edit a parameter, press the item to edit.

11. Use the keypad to enter or edit the cook temperature

for the product.

Page 1 of 4

ACTION

*8198037*

01/2024

Table of Contents

Do you have a question about the FilterQuick FQ4000 easyTouch and is the answer not in the manual?

Page 1 FilterQuick Touch FQ4000 Product Programming DISPLAY ACTION 1. Press the Home button. 2. Press the Recipes button. 1 6 5 0 3. Enter 1650 4. Press the √ (check) button. 5. Choose the product icon to edit or press the + to add a new product.
Page 2 DISPLAY ACTION 12. Press the √ (check) button. 13. Press the cook time button. 14. Use the keypad to enter or edit the cook time in minutes and seconds. 15. Press the √ (check) button. 16. Press the load compensation or sensitivity button. 17.
Page 3 DISPLAY ACTION 23. Enter the time in minutes and seconds for the second shake to be performed. 24. Press the √ (check) button. 25. Press the down arrow to scroll to more settings. 26. Press the Filter button. (NOTE: ON or OFF is displayed for current selection.) 27.
Page 4 DISPLAY ACTION 35. Enter the number of cooking cycles which occur for this product before the filtration prompt is displayed. This is for product only and is not to be confused with a global filter count. If no prompts are desired set to 0 to disable.