note
The flash feature does
not function when line 1
and line 2 are on a
conference call. (See
3-way conferencing and
4-way conferencing,
pages 27 and 28).
[ 22 ]
B A S I C S
Selecting a Different Channel
If you encounter interference while using your phone, you can manually change
the phone´s channel for clear operation. This function works only when the phone
is in use.
The chan on the handset allows you to choose between 20 dif ferent channels.
During the course of a conversation, if you hear static or noise which makes it
dif ficult to hear, press chan. The following screen appears and the phone changes
to a dif ferent channel. For more
information on interference, refer to
"Precautions" on page 51.
Using the Page Feature
To locate the handset (when it is of f
the base), press intercom on the base.
The handset beeps for 60 seconds.
The following screen appears:
Press any key on the handset to connect to the base.
Press Lup/int'com on the handset or intercom on the base to return to standby.
Flash and Call Waiting
If you have "Call Waiting" service and a
call waiting tone sounds while you are
on a call, press delete/flash to accept
the waiting call. There is a short pause, then you will hear the new caller. To return
to the original caller, press delete/flash again.
You must subscribe through your local telephone company to
note
receive Call Waiting Service.