D&R AURON Quick Start Manual

Before you begin:
•
Download the user manual:
Visit www.dnrbroadcast.com, click the Support button on the homepage, and select Brochures /
Manuals / Software. Download the AURON User Manual and read it at least once.
•
Safety reminder:
Turn OFF both the AURON Master module and AURON Fader module before connecting them to
avoid grounding issues that may damage input circuits.
Power up the equipment in the following order:
1. Turn ON the AURON Fader module.
2. Turn ON the AURON Master module.
•
Maintenance tips:
o
Clean the front panel periodically with a slightly damp cloth.
o
Avoid smoking, eating, or drinking near the console.
1. Unpacking and assembly
•
Components:
o
AURON Master module
o
AURON Fader module
o
Power cables
o
44-Pin connector cable
o
Quick start manual
•
Assembly steps:
1. Place the AURON Master module and AURON Fader module on a stable surface.
2. Connect the Fader module to the Master module using the provided 44-pin connector cable.
3. Ensure all connections are secure before powering ON the units in the above mentioned order.
3. Initial system setup
1. On the 7-inch touchscreen, tap "CONFIGURE AURON".
2. Select "System Network" and enter your network settings (IP address, DHCP, etc.).
3. Select "Console Configuration" and assign inputs/outputs.
QUICK START MANUAL
Version: 2025-01-22