Studer Vista 5 Service Manual

Bios update

Hide thumbs Also See for Vista 5:

Download this manual

Vista5 Service Manual

BIOS update

This instruction informs how to perform a BIOS Software upgrade

Please note:

In case of a PC motherboard failure, we may offer a tested board equipped with Processor and RAM card. Even

the Bios will be loaded. Please contact your local representative for further information

Load the BIOS program down from our server and copy it to a Floppy disk.

Connect an external USB Floppy disc dirve to the USB connector on the front of the Vista5

Insert the BIOS floppy diskette and switch on the desk to boot the PC

dir

Check the contains of the disk by entering

The following files should be on the diskette:

Enter now awdflash w9632ims.xxx and press enter

Vista5 Service Manual

BIOS update

Page 1 from 3

Need help?

Do you have a question about the Vista 5 and is the answer not in the manual?

Page 1 Vista5 Service Manual BIOS update This instruction informs how to perform a BIOS Software upgrade Please note: In case of a PC motherboard failure, we may offer a tested board equipped with Processor and RAM card. Even the Bios will be loaded. Please contact your local representative for further information Load the BIOS program down from our server and copy it to a Floppy disk.
Page 2 Vista5 Service Manual (xxx corresponds to the Software version; for version v1.0 type: 100) Wait for the following picture: Answer with to the message: Do You Want To Save Bios (Y/N) Answer with to the Message: Press ‘Y’ to Program or ‘N’ to Exit Vista5 Service Manual BIOS update Page 2 from 3...
Page 3 Vista5 Service Manual Wait until the download is finished Remove USB Floppy drive Press F1 on the keyboard to start PC Vista5 Service Manual BIOS update Page 3 from 3...