Advertisement
The COAST XPSR weatherproof flashlight delivers brightest-in-class light with three light modes.
To turn on the flashlight, press the power button located on the tail cap. The flashlight will start in medium brightness mode.
To set the flashlight on high brightness, press the power button twice.
To set the flashlight on low brightness, press the power button three times.
Pressing the power button a fourth time will turn off the flashlight.
Note: The XP9R was designed with COAST's Easy Off functionality. After the flashlight has been on for five seconds or longer, pressing the power button once will turn it off.
Designed with COAST's PURE BEAM ® Slide Focus and Beam Lock technologies, the flashlight can be continuously adjusted between an Ultra-View Flood Beam and a Bulls-Eye Spot Beam.
To pinpoint the beam on a precise area, grasp the base of the bezel and slide forward.
To expand the beam and maximize the lighting area, slide the bezel backward.
To lock the Slide Focus system, pointing the light outward, twist the bezel to the left. To unlock, twist the bezel to the right.
The XPOR can be powered by either a COAST ZITHION-X™ rechargeable battery, or two CR123 Lithium batteries.
To charge the battery directly, unscrew the tail cap from the flashlight to access the battery compartment and remove the battery. Insert the provided USB Type-C charging cable into the battery charging port, then plug the cable into an available power supply.
To power the XPOR with CR123 Lithium batteries, place two CR123 Lithium batteries in the battery compartment in the correct orientation.
The XPOR was designed for use with a COAST ZITHION-X™ rechargeable battery. Do not use aftermarket rechargeable batteries.
To clean your XP9R, wipe the external body of the flashlight with a damp cloth.
Note: Do not submerge the XP9R.
877-704-4545
GO TO COASTPORTLAND.COM/JOIN TO SIGN UP
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Need help?
Do you have a question about the XP9R and is the answer not in the manual?
Questions and answers