Coast G455 Manual

OVERVIEW

1. PURE BEAM^® OPTIC
2. TWIST FOCUS™
3. STORM PROOF ALUMINUM CONSTRUCTION
4. TAILCAP
5. QUICK-CYCLE™ SWITCH

USING THE LIGHT

Equipped with a Pure Beam^® Optic, the G455 features a three-setting lighting sequence that is controlled with a COAST Quick-Cycle™ switch system. Before turning on the flashlight, partially depress the power button to cycle through high, medium, and low brightness settings. Completely depress the power button to turn on the flashlight in the desired setting. To turn off the G455, completely depress the power button.

ADJUSTING THE BEAM

Equipped with COAST's patented Twist Focus™ technology, the G455 Flashlight can be continuously adjusted between an Ultra View Flood Beam and a Bulls-Eye™ Spot Beam. To pinpoint the beam on a precise area, rotate the bezel of the flashlight clockwise. To expand the beam and maximize the lighting area, rotate the bezel counterclockwise.

POWERING THE LIGHT

The G455 is powered by six COAST Extreme Performance AA Alkaline Batteries. To replace the batteries, unscrew the tailcap of the flashlight and remove the battery cartridge from the battery compartment. Remove the old batteries from the battery cartridge, discard them, and place six new AA batteries in the battery cartridge. Return the battery cartridge to the battery compartment with the positive terminal of the cartridge oriented toward the bezel of the flashlight. COAST Extreme Performance Alkaline Batteries can be purchased at coastportland.com/ep.

CLEANING THE LIGHT

To clean the G455, wipe the exterior of the flashlight with a damp rag. Never submerge the G455 in any liquid.