Coast HX500 Manual

Table of Contents

Contents

1 The HX500 features
2 TWIST FOCUS
3 LIGHT MODES
4 OVERVIEW
5 POWER
6 UPGRADE TO RECHARGEABLE
7 MOUNTING ATTACHMENTS
8 CARE
9 Documents / Resources
- 9.1 References
- 9.2 Download manual

Coast HX500 Manual

The HX500 features

COAST's Pure Beam™
Twist Focus™ optic,
and multi-use mounting attachments.

TWIST FOCUS™

Twist bezel to adjust from Pure Beam™ flood to Bulls-Eye™ spot beam.

LIGHT MODES

Use the power button to cycle through light modes. After 5 seconds in any light mode, the next press of the power button will turn off the light.

Medium
High
Low

OVERVIEW

Overview

POWER

The HX500 can be powered by 3 x AAA alkaline batteries.

The strength of the magnet for attachments can cause batteries to move during installation.
To avoid this, try installing all three batteries at the same time.

Reference battery icons inside the battery compartment to ensure new batteries are installed in the correct orientation.

UPGRADE TO RECHARGEABLE

The HX500 can also be powered by the optional COAST Zithion-X™ rechargeable battery for increased performance and battery savings. To learn more, visit coastportland.com/ZX350
UPGRADE TO RECHARGEABLE

MOUNTING ATTACHMENTS

The HX500 connects to mounting attachments using the magnet on the side of the light.

HELMET ATTACHMENT WITH 3M ADHESIVE
Note: The adhesive is very strong and will not allow for adjustment. Verify mounting location with backing still in place before removing backing and permanently adhering the helmet attachment.
HELMET MOUNT CLIP
Designed to fit securely in ear protection slots of most safety helmets with that feature.
BALLCAP CLIP
Suitable for use on side or bill of a cap.
The HX500 can also be used as a handheld light or be mounted directly onto any ferrous metal surface.