Ricoh Priport HQ7000 Operating Instructions Manual page 44

PostScript 3 - Setting Up for Printing
❖ [Job Separator]
When set to "On", classifying will occur whenever the document data changes.
❖ [Enable Short Master]
You can select whether to set the length of the master automatically.
1
❖ [Rotate Image]
When set to "180 degrees", the image will be rotated 180 degrees and printed.
This is very convenient when printing on envelopes. See p.44 "Printing onto
envelopes"
❖ [Brightness]
Seven phases can coordinate brightness of the whole printed image.
Note
❒ Brightness of color of character is not changed.
❖ [Line Density (lpi)]
You can select the screen ruling (resolution).
❖ [Separate into CMYK]
It is possible to output only the color selected from Cyan, Magenta, Yellow,
and Black. If "Don't Separate" is selected, separation will not be done.
❖ [User Code:]
Use this to set a user code for print logging.
Enter a user code using up to eight digits. A user code identifies a group of
users and allows you to check the number of sheets printed under each code
with SmartDeviceMonitor for Admin.
Reference
For more information about using SmartDeviceMonitor for Admin, see the
Help file.
40