Ricoh Priport HQ7000 Operating Instructions Manual page 43

❖ [Resolution:]
The resolution is fixed.
Note
❒ The resolution may vary depending on the printer model.
❖ [Printer-Side Operation]
It is possible to perform a few things using both the machine's display panel
and the printer driver installed in your Macintosh. When [Printer-Side Opera-
tion] is set to "On", the following items are enabled on the display panel.
• Speed Select
• Cycle Setting
• Job Separator
• Skip Feed
• Eco. Mode
• Number of print sets
Note
❒ "Cycle Setting" is displayed on the machine's display panel as "Auto Cy-
cle".
❖ [Reset Printer Panel]
When set to "On", the machine settings return to their defaults before Master
Making.
❖ [Cycle Setting]
You can select the cycle setting mode of master making and printing.
❖ [Eco. Mode]
When set to "Level 1" or "Level 2", the amount of ink consumption is re-
duced.
Note
❒ Level 2 will be lighter than Level 1.
❖ [Speed Select]
You can select the printing speed.
❖ [Skip Feed]
• Use to make the interval between paper feeds longer, allowing the ink to
dry.
• Use to print on a paper longer than the standard size.
Limitation
❒ The maximum length of paper that can be printed using Skip Feed is 460
mm. However, when printing on paper longer than 432 mm, the delivered
paper may fall off the paper delivery end plate. Therefore, you should hold
the paper so that it does not fall off.
Macintosh
1
39