Ricoh Priport HQ7000 Operating Instructions Manual page 22

PostScript 3 - Setting Up for Printing
[Advanced] dialog box
This dialog box is displayed when you click [Advanced...] on the [Paper/Quality] tab
or the [Layout] tab. Here you can set detailed items about the paper size and the
1
functions of the printer.
❖ [Paper/Output]
❖ "Paper Size"
Select the size of the paper to be printed.
Note
❒ It is possible to set the size of custom paper when selecting "PostScript
Custom Page Size". See p.21 "Printing on custom sized paper".
❖ "Collated"
If you select more than "2" in "Copy Count" , "Collated" will become en-
abled. Make sure to regularly clear the "Collated" check box, because if
"Collated" is not cleared, master making may be done every time a page is
going to be printed.
❖ [Graphic]
❖ "TrueType Font"
TrueType Font can replace printer fonts by following the "Font Substitu-
tion Table" when "Substitute with Device Font" is selected.
❖ [Printer Features]
❖ "Printer-Side Operation"
Settings can be made using the printer driver on the computer and the ma-
chine's display panel. When "Printer-Side Operation" is set to "On", the
following items can be set on the display panel.
• Speed Select
• Cycle Setting
• Job Separator
• Skip Feed
• Eco. Mode
• Number of print sets
Note
❒ "Cycle Setting" is displayed on the machine's display panel as "Auto
Cycle".
❖ Reset Printer Panel
When set to "On", the machine settings return to their defaults before Mas-
ter Making.
18