Ricoh Priport HQ7000 Operating Instructions Manual page 34

PostScript 3 - Setting Up for Printing
❖ "Paper Source"
Specify a paper feed tray where the paper to be used is loaded.
Note
❒ Select "Paper Feed Tray" here.
1
❖ [Graphic]
❖ "TrueType Font"
TrueType Font can replace printer fonts by following the "Font Substitu-
tion Table" when "Substitute with Device Font" is selected.
❖ [Printer Features]
❖ "Printer-Side Operation"
Settings can be made using the printer driver on the computer and the ma-
chine's display panel. When "Printer-Side Operation" is set to "On", the
following items can be set on the display panel.
• Speed Select
• Cycle Setting
• Job Separator
• Skip Feed
• Eco. Mode
• Number of print sets
Note
❒ "Cycle Setting" is displayed on the machine's display panel as "Auto
Cycle".
❖ Reset Printer Panel
When set to "On", the machine settings return to their defaults before Mas-
ter Making.
❖ "Cycle Setting"
You can select the cycle setting mode of master making and printing.
❖ "Eco. Mode"
When set to "Level 1" or "Level 2", the amount of ink consumption is re-
duced.
Note
❒ Level 2 will be lighter than Level 1.
❖ "Speed Select"
You can select the printing speed.
30