Ricoh Priport DX 4640PD Network Manual page 99

❖ Interface Priority Configuration
You can assign priorities governing which interface obtains AutoNet param-
eters.
msh> autonet priority interface_name
Note
❒ Priority assignment is useful when connecting more than one interface to
the printer.
❒ If an interface is not selected, the interface appears according to the cur-
rently set priority, regardless of multiple interface connections.
Interface name
ether
*1
wlan
*1
Available when the IEEE 802.11b interface unit is installed.
Reference
For details about AutoNet, see p.97 "Using AutoNet".
Changing the password
Use the "passwd" command to change the remote maintenance password.
Important
❒ Be sure not to forget or lose the password.
Note
❒ The default password is "password".
A
Enter "passwd".
msh> passwd
B
Enter the current password.
Old password:
C
Enter the new password.
New password:
Note
❒ The password must consist of three to eight alphanumeric characters and
symbols. Passwords are case-sensitive. For example, "R" is different from "r".
❒ The password is the same as that used in configuring the network interface
module with a Web Image Monitor and that used in NIB Setup Tool. If you
change a password from telnet, the other passwords are also changed.
D
Enter the new password again.
Retype new password:
Interface to be configured
Ethernet interface
IEEE 802.11b interface
Remote Maintenance by telnet
9
93