Ricoh Priport DX 4640PD Network Manual page 49

K
Click the [Printer Settings] tab.
L
Clear the [Form feed] and [Enable banner] check boxes.
Note
❒ You do not have to select these boxes because they should be specified in
the printer driver. If they are selected, the printer might not print correctly.
When using the PostScript3 printer driver
Follow the procedure below to set the PostScript3 printer driver:
A Click the [PostScript] tab.
B Click [Advanced].
C Clear the [Send CTRL+D before job] and [Send CTRL+D after job] check boxes.
M
Click [OK] to close the [Printer Properties] dialog box.
Windows 2000/XP, Windows Server 2003, Windows NT 4.0
Follow the procedure below to set up a Windows 2000/XP, Windows Server
2003, Windows NT 4.0 client computer.
Preparation
Log on to the NetWare file server before starting the following procedure:
A
Double-click [My Network Places], navigate to the queue you want to use, and
then double-click it.
The [Printers] dialog box appears.
Note
❒ When using Windows NT 4.0, the Network Neighborhood icon appears
on the desktop instead of the My Network Places icon.
B
Click [Yes], and then click [OK].
Add Printer Wizard starts.
C
Insert the CD-ROM labeled "Printer Drivers and Utilities" into the CD-
ROM drive, and then click [Have Disk].
If the setup menu starts automatically, you can proceed to the next step. If not,
see Printer Reference.
D
Follow the instructions on screen to complete installation of the printer
driver.
Printing with NetWare
43
5