Ricoh Priport DX 4640PD Network Manual page 87

❖ Display
The following command displays current tcpip, appletalk, netware, and smb
settings.
msh> set protocol
Printer status
The following command can be used to get information about the current print-
er status:
msh> command
Command
status
info
prnlog [ID]
Note
❒ More information about print jobs is displayed if the ID number is added af-
ter the prnlog command.
Reference
For details about the meaning of the data returned using these commands, see
p.100 "Understanding Displayed Information".
Network interface module configuration settings information
Use the "show" command to display the network interface module configura-
tion settings.
msh> show [-p]
Note
❒ Add "-p" (as above) to have the information displayed one screen at a time.
Reference
For details about the meaning of the data returned using this command, see
p.104 "Configuring the Network Interface Module".
System log information
Use the "syslog" command to display information stored in the system log.
msh> syslog
Reference
For details about the displayed information, see p.108 "System Log Informa-
tion".
Information that is displayed
Status of printer.
Information about print jobs.
Information about the paper tray, output tray, printer
language of printer.
Lists the last 20 print jobs.
Remote Maintenance by telnet
9
81