Using The Operator Panel - Dell A960 Owner's Manual

Using the Operator Panel

The operator panel buttons help you scan, copy, fax, and customize documents. When
Power is lit, the printer is on. You can select a mode from the Mode area, select or change
settings using several of the buttons, and initiate a scan, copy, or fax from the Start area on
the far right.
5
3
4
Use the:
1 Mode area
2 Start area
3 Power
4 Stop/Clear
(Cancel)
5 Copy
6 Scan
7 Fax
8 Number of Copies
9 Quality
1
17
7
6
8
To:
Select a Mode (scan, copy, or fax).
Start a color or black and white scan, copy, or fax job.
Turn your printer on or off.
• Cancel a scan, print, or copy job in progress.
• Clear a fax number or end a fax transmission and return the display to the fax default.
• Exit a menu.
• Clear current settings and return to default settings.
Enter copy mode.
NOTE: This button is lit when the printer is in copy mode.
Enter scan mode (possible when the printer is attached to a computer).
NOTE: This button is lit when the printer is in scan mode.
Enter fax mode. The printer can receive a fax while in any mode.
NOTE: This button is lit when the printer is in fax mode.
Specify a number (1-99) of photocopies.
• Select from the following copy qualities: Quick, Normal, Better, or Best.
• Select a fax resolution: Standard, Fine, Superfine, or Ultrafine.
• Select a scan resolution when the printer is attached to a computer.
18
19
11
9 10
2
13
14
12
Getting Started
16
15
15