Initializing Nvram; Setting Of Panel Lock - Dell 5100cn Owner's Manual

Initializing NVRAM

You can restore the original factory default menu settings by initializing NVRAM.
Press Menu.
1.
Press until Configure appears, and then press
2.
Press until Maintenance appears, and then press
3.
Press until Init NVRAM appears, and then press
4.
The Init NVRAM Are you sure? message appears on the operator panel.
5.
Press .
Turn off the printer, and then turn it on again.
6.

Setting of Panel Lock

This feature prevents unauthorized personnel from changing settings made by the printer
administrator. For regular printing, items can be selected from the menu and printer settings
remain unchanged.
For regular printing, items can be configured using the printer driver.
Press Menu.
1.
Press until Configure appears, and then press
2.
Press until Security appears, and then press
3.
Panel Lock is displayed. Press
4.
Press until On appears, and then press
5.
Press .
6.
Press until Change Password appears, and then press
7.
Enter the old password (when you enter it for the first time after doing the settings, enter
8.
0000), and then press
Enter the new password, and then press
9.
Reenter the password to confirm the password that you entered, and then press
10.
The password has been changed.
NOTE:
If you forget your password, turn off the printer. Then, while holding the Menu button, turn on the
printer. This will recover the factory default menu settings. The factory default panel password is 0000.
or .
.
.
.
or .
or .
or .
or .
or .
or .
.
35
Using Your Printer