KitchenAid KECD806RBL - Pure 30 Inch Smoothtop Electric Cooktop Installation Instructions Manual page 7

For all cooktop models with three-wire cable from the cooktop:
Where local codes Do Not permit connecting the frame-
ground conductor to the neutral (white) junction box
wire. (Used for Canadian installations):
Ungrounded
neutral
Figure 1
bare or green
1. Disconnect wires
power supply.
2. Remove the junction
box cover from the junction box inside the cabinet.
3. Connect the flexible, armored cable from the cooktop to the
junction box using a U.L.- or CSA-listed conduit connector.
Tighten screws on conduit connector.
4. Connect the two black wires together; then connect the two red
wires together using twist-on connector. (See Figure 1.)
5. Connect the green or bare ground wire from the cooktop cable
to the grounded wire in the junction box or other grounded
connector using twist-on connector.
6. Put a twist-on connector on end of white wire. Do Not connect
bare ground wire to neutral (white) wire in junction box.
7. Replace the junction box cover.
For all cooktop models with four-wire cable from the cooktop. (These cooktops are manufactured with white
[neutral] power supply wire and a cabinet-connected bare ground wire factory-crimped together.):
Where local codes Do Not permit connecting the frame-
ground conductor to the neutral (white) junction box
wire: (Used for Canadian installations):
4-wire cable from power supply
red wires
Ungrounded
neutral
Figure 3
bare or
green
wires
1. Disconnect
4-wire cable
from cooktop
power supply.
2. Remove the junction
box cover from the junction box inside the cabinet.
3. Connect the flexible, armored cable from the cooktop to the
junction box using a U.L.- or C.S.A.-listed conduit connector.
Tighten screws on conduit connector.
4. Connect the two black wires together; then connect the two red
wires together using twist-on connectors. (See Figure 3.)
5. Separate the factory-crimped bare and white cooktop cable wires.
6. Connect the two white wires together using twist-on connectors.
7. Connect the bare ground wire from the cooktop cable to the
grounded wire in the junction box or other grounded connector
using twist-on connector. (See Figure 3.)
Do Not connect bare ground wire to neutral (white) wire in
junction box.
8. Replace the junction box cover.
4-wire cable from power supply
red wires
U.L.- or CSA- listed
conduit connector
3-wire cable
from cooktop
junction box
white wires
black wires
U.L.- or CSA- listed
conduit connector
Where local codes permit connecting the frame-ground
conductor to the neutral (white) junction box wire. (Not
used for Canadian installations):
junction box
Grounded
white wire
neutral
Figure 2
twist-on
connector
black wires
1. Disconnect
power supply.
2. Remove the junction box cover from the junction box inside
the cabinet.
3. Connect the flexible, armored cable from the cooktop to the
junction box using a U.L.- or CSA-listed conduit connector.
Tighten screws on conduit connector.
4. Connect the bare cooktop wire with the white wire; the two
red wires together; and the two black wires together using
twist-on connectors. (See Figure 2.)
5. Replace the junction box cover.
Where local codes permit connecting the frame-ground
conductor to the neutral (white) junction box wire. (Not
used for Canadian installations):
Grounded
neutral
Figure 4
twist-on
connector
1. Disconnect
power supply.
2. Remove the junction
box cover from the junction box inside the cabinet.
3. Connect the flexible, armored cable from the cooktop to
the junction box using a U.L.- or C.S.A.-listed conduit
connector. Tighten screws on conduit connector.
4. Connect the two black wires together; the two red
wires together; and the factory-crimped bare and
white cooktop cable wires to the white (neutral) wire
in the junction box using twist-on connectors. (See
Figure 4.)
5. Replace the junction box cover.
3-wire cable from power supply
red wires
white wire
bare or
green wire
3-wire cable
U.L.- or CSA- listed
from cooktop
conduit connector
3-wire cable from
power supply
junction
box
red
wires
white
wire
white and bare
grounding oven cable
wires — factory
crimped
4-wire cable from cooktop
junction box
twist-on
connector
black wires
black
wires
U.L.- or CSA-
listed conduit
connector
7